Separate names with a comma.
Some features disabled for guests. Register Today.
Have you calibrated the X,Y, and Z axis? There is a calibration wizard in Ope builds Control. I like to use as long of a measuring stick as I can.
What are your $30, 31, and 32 values? I believe you need these, but I am unfamiliar with lightburn:
Once you get everything tight and calibrated, I would do roughing passes first, leaving 0.2 or 0.3 mm to be removed during a full depth finishing...
Although, The outer measurements will be pretty tight with the wheel mounting holes. Yje more I look, the more I believe you will need a custom...
Looks like a simple pate with holes for the spindle and holes that will line up with the z gantry plate would be a quick make out of aluminum....
In your situation, I would: buy a rotary axis mount it to something that will always keep the head and tail stock aligned have your existing...
I like your method of squaring up the cast corners first before installing the extrusions.:thumbsup:
I used linear rail like these from a different reseller. I have a modified ox customized in 2016. I am still doing the linear rail mod, but I...
It should be easy to implement on a LEAD with a high Z mod. Then add a rotary axis under either the x or y axis. You would have to use the plug...
The K40 uses mirrors and so will my upgraded version when I get around to building it.
That is what I did. I realized I could get a 40 watt K40 for the price of a good quality laser diode. If I were to do it again, I would build a...
Search "laser module" on Amazon. I have no idea of the quality, but those are other options. Lots of them will be called 30 watt, but that is not...
There are lots available, but quality can be hit or miss which is why the good ones are recommended. They are easier to troubleshoot. A business...
I would read through the documentation to be sure it is all connected properly. Then continue on here with the documentation. It tells you how to...
Homing, hard and soft limits. I would read the entire GRBL wiki if I were you. It will save you frustration and headaches. Here is the section...
Here is one with a sketchup file that you could probably generate a .dxf file for making tool paths. Scott's Router Table Are you attaching the...
Great motto.
Oops. I also bought a 500mm piece of 2020 v slot for the upright braces.
The most expensive part was the rotary axis. But, If a person went with a smaller one like a 65mm chuck, that waould knock about $100 off the...
Do you mean an arm the holds the knife that does the carving? I think the easiest is to do one similar to mine. Then you are not limited to just...
