Separate names with a comma.
Some features disabled for guests. Register Today.
I use a straight for all wood no matter the thickness. I like the finish better due to no tear-out. As for expanded pvc, that should be easy to...
There are a couple of people who have done this. Go to the Laser section of the forum and search "acro Z axis". Here is one of them. Modified...
For some reason my son only shows the z axis with his right hand, but only when he is mad at me.
Or if you are lazy like me, try Estlcam. It it somehow magically does this stuff for me.:thumbsup: It is well worth the $59.
Sounds like a jig for your sander is the best bet. Unless you want to build or buy a lathe.
Why not glue up the six panels and then cut the wheels out with the CNC? They will be nice and round. If you need them rounded over you could...
I have been mulling this one over for my K40. Right now I use k40 whisperer with the stock board.
Thanks for the info. Now I have to try it.
Acetone welds ABS, but it also has an odor. So, probably not much help there other than cost effectiveness and your body naturally produces...
Ok. I totally misunderstood what you were trying to accomplish. :)
Oh, and that bit also works great on HDPE plastic.
I use straight flute bits for woods and get nice clean cuts with no tear outs. I like this Freud one,...
Something similar was done on a 3D printer build. TrueUp Glide
Looks good! Slate tile is good material to laser as well.
Ha! Last week I switched cutters in the middle of the job and forgot to re-zero the Z. I plunged down into the wood almost to the collet before I...
GitHub was confusing to me at first, as well. But after looking at that page a million times whenever I was stumped, it has gotten easier. As...
The computer is used to design your part, then to generate the CAM file (gcode). Depending on what CAD program was used to design the part, you...
Are you sure you want to shim it with plastic? There are many 65 mm spindle mounts available online. I bought one for less than $30 for my Makita.
Apparently the build has been either removed from OB forums by the author, or he just provided a link to his webpage in another thread. Here it is...
Vcarve should allow you to carve what you want with a rotary axis. There was a build posted here last fall called the Rotary Demon. It was a fully...
