Separate names with a comma.
Some features disabled for guests. Register Today.
What plates are you using?
Are you trying to be able to cut 2 foot by 3 foot? If so, you need to subtract out the size of your X and Y plates from the amount you will be...
I would think that either sealer would work. I am a big fan of the water-based for cabinets and that is all I have used for more than a decade...
54.347826087% :D But, yeah depth would be easier.
I didn't even think about the lack of half inch. Come to think of it, I haven't seen it out here on the West Coast either. I used particle board...
Thanks Gray and good choice Rod. I wish I would have kept better track of the build threads which delved into a specific topic in detail. There...
Home Depot will cut it down to a manageable size. I believe Lowe's does too. It used to be HD would do one cut for free. Last time I was there,...
Thank you. I wonder if white paint would work. I may try it just as a practice run before using the Melamine. I have a white house and a white...
To zero the Z, I have found this method to be the best for me. This will only work if your Gcode is set so the spoilboard (tabletop in...
Those halftone images are awesome! Did you paint the wood white first? Then cut? Or am I not looking at it right? I would like to try it.
I highly suggest you design your CNC with Sketchup or some other CAD software. Then, you can measure everything and determine if it is what you...
I did something similar to what you are considering. I mounted my Y axis to the bench top like the picture below and it is rock solid. The 1/8...
Does it act jerky when the motors are running faster?
To attach a link, just cut it from your web browser and paste in the text portion of your reply.
I have two 20x80 Vslot rails bolted together forming my X axis which is only 850 mm long. If I push real hard on it by hand, it will flex. I have...
In the video comments he says it (X axis) is "60 120 extrusion from Misumi." The y- axis looks like it is Makerslide. The v wheels run on a v...
I used 6061 aluminum and a Freud 60 tooth 10 inch blade in the table saw. Diablo Tools | 10 in. x 60 Tooth Fine Finish Saw Blade . It was not...
This may help How to calculate V-Slot® deflection
I got the flange mount bearings from aliexpress (12 mm diameter zinc alloy bearing housings KFL001 flange bearing housings with pillow block 4...
If you want me to try a feed/speed/depth test, send me some settings and I will give it a shot. I have never been in too much of a hurry, so I...
