Separate names with a comma.
Some features disabled for guests. Register Today.
The whole idea about casting is to get rid of residual stress within the material. Funny enough, the plate flatness means little when just the...
4.03 is what forces the upgrade.
This is what mine looks like over the magnets: [ATTACH]
Very flat and rigid is 7075 aluminum. It cracks when you try to bend it. Problem with aluminum is that it expands significantly as it heats up....
You could try renaming the .ar file to the 1.14B name. Otherwise you have to downgrade your UI software... 3.something instead of 4.03. 4.03...
The closest thing in CTE to alumina is Kovar... and a close second is Ti. I would never join aluminum to alumina directly. Over 6", that would...
I work with alumina in my professional life on a regular basis. That is one surface that I can depend on. Macor, however, does exactly what you...
Same guy has 6" x 6" x .04" for $24. Ordered. LARGE THIN SQUARE 6" x 6" ALUMINA CERAMIC SHEET SUBSTRATE No.: 18 | eBay I'm going to try this...
Yep :)
Razor... glass doesn't like me. My parts tend to have excessive adhesion.
The gauge they supplied with the printer.
That is likely the second binary file by managing machine type and activation. Probably keyed into a hardware device unique ID. If you can...
Sweet... yes and no. Early units have a polymer that has signs of thermal expansion stress shearing the material at the magnets. Later versions...
oops... already back in the box.
doesn't link to p/n either...
Doug, what's the chances of someday writing a common percentage value to all chips, 100%, 0%, or intermediate. If 100, write 99, loop If 0, write...
Turns out the Lego Mindstorms gears fit the cartridge spool perfectly :) Just a bit sloooooooooooooooooooooooooooooooooooooooooooooow
There must be an incidental hook to the rest of the software that the reading of the chip is on the right or left. I know it has unique names so...
First let me find the chip. PM here is a "conversation".
I didn't get that fancy with the merging of filaments. I have a butane soldering iron where you can remove the tip and you have flameless heat. I...
