Separate names with a comma.
Some features disabled for guests. Register Today.
Cube 3 uses 1.75 filament but it is more like 1.70mm. I tried an ebay off-brand and it was way to stiff to feed through the stock feeder. Before...
Interesting, thanks. Now to salvage some chips and a clever way to hold everything in place. Anyone come up with a good budget filament that is...
MeshMixer is a facet based model manipulator. One of its features is supports. You output files for the Cube software.
Just put two rooks on the plate in the software and merge them half way or something. Each can be assigned their own color. You can also use...
And one other note for posterity: The gap calibration actually makes use of the label attached to the brown Mylar leaf. According to 3D Systems...
Even 3D systems uses Meshmixer for making supports. It is a bit tricky and am still tweaking it, but try making a cross and get the settings t...
I'm surprised this thread hadn't hit on the heater error that stops prints dead in their tracks. Any consensus on this one?
Congrats on the successful rook print! You do know that the build plate only has one position, right? :) On the switch... On a previous test I...
The belt should not shed many particles at all. In my case, the left and right upper shelves were massively dusted in the unit that was failing....
I'm still on 7. Only issues I have is that the 4.03 software is really hard on the NVidia card. Already blew out one GPU and get constant kernel...
After the shift error, the prints are still self centering.
Let's see if this works... When you get your new printer, look here before anything else: Cube3 - Printhead carrier cracked by Tom Dirriwachter...
Prior to belt fraying. White unit #2.
Bad assembly. Freakishly pervasive. Original white unit; Warrantee replaced
Fraying belt; Replaced white unit; Warrantee replaced.
A cube3 formatted file can be loaded any way you like. Direct from a USB drive or from the Cube s/w (add from file). I attached the 3D Systems...
Dual printing depends on having two nozzles at the exact same level, or at least within about 10um. That doesn't seem to happened without some...
It could very well be a second operation startup for white printers. So far this one is behaving. Main noise contributor is the plastic tray...
And one other favor: What filament are you guys feeding into the stock filament feeder for the Cube 3? It seems to like softer undersized...
A few words on variety; I have 3 printers, one was replaced twice, and have a colleague with one. That's 6 printers so far. Never buy a white...
