Separate names with a comma.
Some features disabled for guests. Register Today.
They still work for me.
Custom Post-Processor for GRBL The 'Generic GRBL' Post Processor in Autodesk Fusion360 isn't really well optimized or adapted to GRBL, so I...
Hi everybody, I have another one a problem with my Z axis, just after set up my 3 Axis to zero, when I run the program, only Z axis start go down...
OpenBuilds CAM is aimed at beginners and is thus 2.5D Best option for 3D work is offered in the store: VCarve Desktop or...
I am using fusion360 cad/cam for the moment,
Yes, I know. That's why I'm trying it. :thumbsup: That was it!. Thanks.
Hi Joe! Thanks for the detailed reply. I'm in no rush with this project. It's to house my electronics to protect them against the elements. I...
Hi, I use solidworks for my CAD and CAM program, but the workbee has all axis homed when I start the carving.
Hmmm, found some interesting things in the plasma processing.... go here GitHub - OpenBuilds/OpenBuilds-Fusion360-Postprocessor: Post Processor...
i doubt the movement caused the board to fry.. the current is limited and the board is protected. Post your grbl settings for your xpro here....
@pjunger You need to select a post processor which doesn't use arcs as this isn't supported in GRBL. I am not sure why the best one is in...
I will check it out and compare with my edit..... I changed the reference in the post processor. I believe it use peirce offset and I changed it...
fixed in V1.0.41 GitHub - OpenBuilds/OpenBuilds-Fusion360-Postprocessor: Post Processor for Fusion 360 for use with OpenBuilds Machines running...
Thanks Peter! Yes will try the leadscrew 1010 if not :). And just the last question from above "...You mentioned that the X32 uses grblHAL and...
In Case someone else had the same question as me, I figured it out. When I am creating my tool path in RhinoCAM, I left the machine as undefined....
sadly, the grbl post supplied with Fusion360 is not very good at all. Here is a better one GitHub - Strooom/GRBL-Post-Processor: Start and yes,...
Peter that doc needs to be updated to the latest release link...
Also note that in GRBL moving to X0 (or Y or Z) WILL hit the switch and cause an alarm. This is why the OpenBuilds Fusion360 post will output...
Fusion360 CAM can generate gcode files that can be loaded straight into Control. It's a three stage process: 1) Make a 3D model in the Design...
Are you using the same post processor for the machine setup as you are when generating the gcode? If not, you could get different behaviour. The...
