Separate names with a comma.
Some features disabled for guests. Register Today.
I think this is the solution. I put in 1 in the WCS Offset and it doesn't give that error. Defining Work Coordinate Systems in the Fusion 360 CAM...
Hello all and thanks for all your replays. I have now used some hours to get a better circle by adjusting the screws. - It is not 100% perfect...
This can be caused by 2 things: 1 - You need to set the end of job Z position option for the post-processor correctly: [IMG] you need to set the...
calibrate machine no problem profile toolpath no problem just pocket toolpath can't accurate
Indeed that does work but it does not address the fundamental elephant, the machine does not have a safe home position that is the basis for...
nothing wrong with that gcode, it expects the top of the material to be Z0, and it expects Z home to be the top of Z travel as is standard on all...
Welcome! Can you clarify this? You say that you got everything except software. Does this mean that you bought a controller with it as well?...
I've read your posts Jeremiah. Your going to spend a lot of time messing with grbl for the work you want to do. Sure, one could say run any flavor...
That's incorrect: The BlackBox X32 was launched a couple months ago... Its predecessor, the BlackBox 4X was only a 3-Axes controller running grbl...
so that is what REALLY changed, the size of the bit. A lot of automation goes on in generating Gcode, I don't know VCarve but Fusion360 has...
That would be because you set the Z offset to +15 in the Fusion360 post options. The default is -10, which prevents it hitting the limit switch....
That is a Fusion360 default GRBL post output (confused about where easel comes into play?), please use the Openbuilds post instead (it also puts...
Demon post is for old Grbl (3 Axes, wraps rotary around X or Y) There is no "4th axes" axes post for Vectric that I know off, you certainly can...
I don't a see a mention of how you are generating your Gcode, nor an attached Gcode file for us to check so I am guessing. if you are using...
Yes, you still stream gcode using CONTROL: See docs:software:overview [OpenBuilds Documentation] CAM side you can use OpenBuildsCAM or Fusion360...
If I may ask ? What machine have you post processed HSMWorks to ? There is a HUGE selection, including generic grbl and generic grblplus - - but...
Those options tell me you are not using the OpenBuilds postprocessor for Fusion360. Get it here docs:software:fusion360 [OpenBuilds Documentation]...
Thanks so much for the answer, so could I customize some macros to do the home loop? If I used a different card with more pins, would the problem...
If we dissect that line of Gcode we can get an idea of what is going on. G3 X24.0944 Y9.8490 I-0.005 J-0.0497 G3 indicates a CCW arc. X and Y are...
come to think of it, that is a very long staydown setting and that might be causing the lack of retracts between probes/cut starts. since it is...
