Separate names with a comma.
Some features disabled for guests. Register Today.
I’m going to read the link you sent but one thing to add is that I haven’t edited this code at all this was a direct fresh dump from fusion.
You are taking about the Fusion built in Grbl post? which does a lot of things weirdly (that included) Most of our customers do (and more should)...
I take it you mean in Fusion360? The OB post already inserts a bunch of info about the job, but not as 'variables' because GRBL does not...
on the other hand I am absolutely sure which postprocessor is better for plasma, our Openbuilds post is the one (-: The stock one is not good at...
Hey folks! Tried it again with a post processor (based on Openbuilds actually) for Fusion360. Here is the link for a paper trail: GitHub -...
The Openbuilds Fusion360 post creates an .nc file per tool. so 2 files means you have 2 tools selected. This is commented inside the .nc files,...
Those instructions seem to match those from Autodesk, as an alternative you can install the post processor locally - instructions here -...
Sounds great. Of course I use the Makita so I may be biased. ;)
fixed it, so jump over to GitHub - OpenBuilds/OpenBuilds-Fusion360-Postprocessor: Post Processor for Fusion 360 for use with OpenBuilds Machines...
The post processor options allow you to set the Z clearance, which it will then use for the G53 safety move. If you are getting a G53 G0 Z0 move...
the link i found for the machine says it has nema34 motors which are bigger than nema23 = more power. that is why I suggest the high torque motors...
Get the latest OB Postprocessor Releases · OpenBuilds/OpenBuilds-Fusion360-Postprocessor Read the options till you find 'Linearise Small Arcs' and...
I did just alow the auto updater run. (installed last week but today is my first day trying to CNC) Hole.txt is one of my Fusion360 outputs the...
Are you using the Openbuilds postprocessor for Fusion360? docs:software:fusion360 [OpenBuilds Documentation] (edit: just realized I said Z when...
This would make great reference material for the Projects & Resources section.
Gcode's correct about 4x4" So machine's steps per mm are incorrect: Grbl v1.1 Configuration Check your steps per mm in Grbl Settings - Get it...
That's mainly been our goal, open the door for the beginner. Same thing with OpenBuilds CAM > try to make it easier Fusion360 has a very steep...
Indeed. The discussion- and fix for the OB grbl post, from @David the swarfer - can be found in in this thread in the remainder of page one and...
David, Thank you so much, Success, I have tried a couple of designs that were giving me fits, and this new Post Processor indeed fixes the...
OBCam is used by many to go from DXF to Gcode (and can draw some primitives too), Fusion360 is also used by many (with the OB postprocessor...
