Separate names with a comma.
Some features disabled for guests. Register Today.
I tried in on my Windows 7 desktop and while the program loads and starts to process an image. It always seems to stop. Is there limits as to the...
Thank you for your assistance.
Does anyone know where I can find a Steps Per Inch Calculator that I can use with these belts? Everything I've found is for the GT2 or smaller...
I'm thinking of running my OX CNC Router with a Probotics Unity Controller as its already configured and setup so that one can run the Y-Axis with...
I just finished the construction of the x and z axis and it went together rather well. The y axis will be my next build, but I have a question...
I looked at the Self Tapping Screws from the Open Builds Store, but the person who I purchased my Ox Router Plates from used 1/4" Aluminum for the...
Finally broke down and ordered a pair of the taps available in the OpenBuilds Store only to have a surprise in the mail today. I had ordered a...
Did you use M5 Self Tapping Screws John? Anything else you can suggest on this topic would be greatly appreciated.
I started by using a combination drill and tap and it worked great for the first few holes. But I ended up hitting a hard spot in one of the holes...
So a 10-24 was sufficient when making all of your connections? I tried using a 10-32 instead of the original M5 x .08 though the available taps...
I've used KBC as well as Travers Tool Canada many times though that still doesn't help with the actual tapping issues. I've even tried...
Whoever said tapping and threading these extrusions should be taken out and donkey whipped. I'm to the point of taking all of my extrusions to a...
I'm building an Openbuilds OX CNC Router and I am looking for input as far as adding a Laser Module into it as well. I see here that you've used a...
I thought of using that setup, though for now I wanted to keep my costs down. At a later date I'll probably step up to Gecko 540's through a USB...
Well David, not to rain on your parade. But you have other options such as AliExpress and DHGate which will quote you in whatever currency you...
You could go with something such as this Metalguru, Mach3 USB 3 Axis CNC Motion Control Card Breakout Board 400KHz Support Windows 7. Also it...
I'll be using a Toshiba Satelite Pro Laptop running Windows XP with the majority of its services turned off. It runs on an Intel 1.4 GHZ....
Thanks for making this easy for me to understand. When it comes to anything mechanical it is very easy for me to visualize how something is...
Is it the same with 4, 6 and 8 wire motors?
I'm presently in the process of constructing my version of an Ooznest CNC Router and I've run into a problem. I need to figure out how to wire two...
