Separate names with a comma.
Some features disabled for guests. Register Today.
Our usual Xtension Limit Switch Kit as shown in docs:blackbox-x32:connect-door-sensor [OpenBuilds Documentation] BlackBox X32 was released in Dec...
So just curious, why are you replacing the BlackBox 4X with an X32? Upgrade? Or did the 4X become damaged as well?
I do! Sleep easier: Backup now! CONTROL > Grbl Settings tab > Backup Settings > and store that backup where you will be able to find it when you...
Any concerns we can help with, that turned you off it? Should be fine too!
Not at all. I am saying it makes a good test to see if you have an EMI issue elsewhere. Then we fix the SOURCE of that EMI (Spindle, Plasma,...
As a test, run the same files from the PC for a bit, EMI is a little more likely to affect Interface (long cable, better antenna) so that might...
OK, not seeing anything wired incorrectly. Laser: BlackBox 4X used a 4-pin connector, you have a 2-pin on there now. Sure it was never...
Either the gcode really contains invalid gcode (post file for review) Or it could be corruption caused by EMI: docs:blackbox-x32:faq-emi...
Use Snipping Tool to capture screenshots - Microsoft Support would make for a much more readable screenshot that a photo of the LCD
I don't use the WebUI myself much (we prefer CONTROL) but perhaps they just hide the password for security reasons? If you aren't using CONTROL,...
Define " loses the WIFI configuration " - its stored in EEPROM, it can't really be lost. You might sometimes fail to connect (Settings still...
Exactly the main concern. Focus efforts on finding cause. Otherwise a brand new X32 may go up in smoke with no chance of warranty once connected...
If its not in working order it can't boot Well, then perhaps the Arduino is dead because you aren't powering it anymore? Not really sure without...
4X flashing currently broken, see OpenBuilds-CONTROL/CHANGELOG.txt at 7a0cbe49c650b61fc5aed45d8c52796968a22c37 ยท OpenBuilds/OpenBuilds-CONTROL...
Not likely. As you see testing another PC doesn't help either
Firmware doesn't just dissappear. Flashing is possible (Wizard and tools menu). But that might be like trying to change the oil on a vehicle...
VIN is the other side of the on board regulator so you probably damaged the Arduino. Replace it
Need to see both ends of things like limits wiring etc. Something caused a short, would need to find what it is.
English only please. See section 15 of Terms of Service and Rules | OpenBuilds Your Vectors needs to be Closed docs:software:file-errors...
