Separate names with a comma.
Some features disabled for guests. Register Today.
Ubuntu 20.04 LTS works for me on a Raspberry Pi 4 and desktop, though my main CNC host is an ancient i7 laptop running Xubuntu 18 with bCNC as...
something less, but not negative, negative Z is cutting into the work
Have to disagree (-: My first job was in embedded automation, and our policy was "you can control it if you can measure it". (and getting...
So this failure is new, therefore there is a cause! Mid summer ambient temperatures are an immediate alert. To improve the cooling on the...
fusion file AND Gcode file please
maybe this is another nudge in the direction of Blackbox V2 using a 32bit chip and the new GRBL HAL so it can read driver status pins? Since OB is...
cutting anticlockwise, so the cut is starting at that point, right? I would try an adaptive clearing with light cuts to just clear that start...
The settings are on the heights tab, and also relates to the Setup origin [MEDIA]
I don't have that mechanism but I do have restricted space, so I cut a spanner in half so I can get it under the carriage to adjust eccentrics....
I agree with Peter, home after power on is a must.
"Is The CNC Electronics Bundle Dangerous?" (voice of Dr House) "Absolutely, if you drop it on your foot, or your friends foot, or head, but they...
With the origin at the top of the stock all Z cutting motion is negative, perfectly normal. Z negative motion will move the bit through the...
and post your Gcode here so we can check it
But that is what the 'setzero' buttons do, and what they are for! Turn on machine run home cycle to establish 'hardware knows where home is'...
That is why the PP2 and then PP3 were developed (-: While some of the expensive controllers like Siemens and Heidenhein probably support...
He has a Phlatprinter 1, none of those are possible since the material is fed through the machine and the sliding surface is the 'top' of the...
2 ways. The depth can be set in percentage of material thickness using the entry box at bottom right of the screen. When you click the tool and...
The gcode is operating in work coordinate system 2, or G55. So you need to setZero for material 0,0,0 with G55 active. G54 is the default, so...
Then please post the Fusion file, and your Gcode file.
just because the GUI does not show the setting does not mean GRBL did not save it. if you change a setting and then reboot the PC, then start...
