Separate names with a comma.
Some features disabled for guests. Register Today.
in the GRBL settings, halve the max speed and acceleration for X Y and Z. That should get it going reliably. you can tune the values higher later.
Not missing at all. Just choose multipass with a layer depth set to your chosen peck depth. Then there are new options that control the retract...
Gcode has a code to set the units G20 sets inches G21 sets millimeters Read your gcode file to find out what it sent to the controller. (just a...
If you search this forum for this question you will find it answered many times. The answer is always 'no, but....except .... maybe....' The but...
If you are starting a machining business then you should listen to this podcast Business of Machining and yes I do mean start at episode #1 and...
I wrote a little script that I run when needed #!/bin/sh cd /usr/share/icons/hicolor/32x32/apps sudo convert openbuildscontrol.png -resize 32x32...
I think it is USB corruption, it has missed the linefeed and G4 that would precede a P1000
i had this on my xubuntu, i just resized the icon file
the arc radii are different by 0.0007" which is enough to make it impossible fro GRBL to draw. You can try setting your post to use more digits of...
The noise appears to be traveling on the AC line a...... ha ha, no. every piece of wire is both a transmitter and receiver. Several bits of...
well, in a previous message I did say: On circles, use V tabs (press END to swap types) and bridge 3 adjacent arc segments, in 2 or 3 places...
The tabs on the inside circles are too short, those circles will fall out during cutting. you need to drag the Vtab across 3 circle segments....
Easiest I think is to choose a belt drive machine (workbee?) then calibrate. OBControl has a calibration wizard and this forum has a calibration...
of course it is precise enough (-: (you did calibrate it, right?) , the difficulty lies in finding the 0,0 point relative to the existing pattern...
do not cut that file. (-: Some parts are too close together and your tabs are not lined up, and too many in some places, too few in others. The...
That looks good! I used a KF foil on a slope glider, flying wing type. Did not work well at all. It is now on the 'modify' pile to get a tail...
That would be because you set the Z offset to +15 in the Fusion360 post options. The default is -10, which prevents it hitting the limit switch....
If the bed is slower than the head then when they move at the same time the head can never move faster than the bed since they have to be...
set your sketchup profile to 'achitectural' which i think will give you the same colors i have. in this scheme any flat sheet shape will have a...
I sleep during the African night, about 8 hours ahead of CST (-:
