Separate names with a comma.
Some features disabled for guests. Register Today.
the bCNC GUI for GRBL can also do it, in the tools section. Note that you can use that tool to add the drag knife corners and save the Gcode,...
ok, I did not see the text file output, it has many options (-: you will have to process the file after saving since I think it will always save...
Yes. bCNC will scan a surface and save the points to a file. It is setup to use that point file for wrapping flat Gcode around the probed surface...
why are you writing code when bCNC can already do this? vlachoudis/bCNC I bound some F keys to the 'record rapid' and 'record motion' functions...
in which case you probably want to use this feature [MEDIA]
Use the Openbuilds postprocessor for Fusion360. It will automatically create a file per tool.
also, if you give a $# command in the serial console it will display all your current offsets so you can see what it thinks G28 is set to.
GRBL defaults the G28 position to 0,0,0, the same as machine home. If you move to anywhere and issue a G28.1 it will set the current position as...
You have not mentioned what GUI you are using. In openbuildscontrol there is the jog speed right there in among the jog controls bCNC will always...
and balance the current settings, ie make them both the same for Y and Y2
Z home is up, correctly, so that END OF JOB z POSITION (MCS Only) (MM) = -10 is correct, Gcode can move it up to 'home-10mm' for safety moves....
can one not pull the code from github and install it on a local server like a RPi ? edit: oh never mind, that code is not on github
I think you need a bullnose tool, with a 45 deg chamfer on the end. then ti can get to the sides and bottom and also do the chamfer without...
The machine has a home, this is 0,0,0 and is the Machine Coordinate System (MCS). Everything else happens relative to this. GRBL supports 6 Work...
32bit. The university has a long history of buying the minimum possible hardware, so only 3G RAM, Intel Centrino 2 processor at 1.8Ghz (HP Compaq...
oh wow, that is a nice development
Yep, I use it too (of course), drew up a drill bit stand on Sunday, will cut it after cross checking on the sizes I have to make sure i have not...
all ok except for those tiny stepper drivers, they are great for 3D printers, not great for routers since you need 2.5 to 3 amps and they cannot...
masking tape and CA glue. and don't do one fixture, do 6, set each of G54 through G59 to the center of a fixture/workpiece, then copy and paste...
Hi Mark, if only.... I can find no mention of plugins being usable in the web/shop version What's included with SketchUp Shop | SketchUp Help...
