Separate names with a comma.
Some features disabled for guests. Register Today.
Where is machine home? have home/Limit switches?
Hi, I need your Fusion f3d file please. and BTW, messing with the arc limits is 99% guaranteed to produce WORSE results, I advise against it, it...
difference in line endings between Windows and Mac? not all text files are created equal (-:
i search in the carbide create forums will find your answers (-:
oh! no limit switch! wow, missed that, ok,you want to 'fake the home' .
In the post options you can set the Z offset that is used for the G53 safety move, what have you set it to? The default is -10mm (0.393") . this...
the M0 means 'program pause', just press 'run' again to continue. better yet, set the options on the post to exclude this line from the Gcode.
Hey Gary, note that SketchUcam, the plugin that generates Gcode from Sketchup, is still available and works well with Sketchup from v8 through...
You probably had a USB communication problem. Use a good quality and short USB cable, keep power cables away from the USB cable.
M5 is ok so long as it is not the cheapest thing in the hardware store (-: ie use a hardened bolt. The standard for tripods is a 1/4-20 which is...
you will need to balance the camera, just like on all other sliders and tilters. so you will need a sliding plate on top of the ball that allows...
I have a bluepill here somewhere, and a Leonardo..... was thinking of just a simple shuttle knob, but i think more buttons are more bettah!
Gcode is just short text instructions so you can open the Gcode file in notepad and read it and check for lines that go far off to the right (make...
I would move the radio station to a dedicated machine. win10 is not good at being a server, they want you to buy a server license!. also check...
check the gcode for lines, usually comments, that are longer than 80 characters. if they exist, remove them.
a pic of the tourbox [ATTACH]
So I saw this thing TourBox - The Ultimate Controller for Creators and immediately wanted one for video editing but also wondered if it will work...
what you are seeing in the simulation is CONTROL's inability to display a G53 move correctly. not many Gcode previewers do this correctly. the...
machine Z home needs to be as high as Z will go in order for Fusion to work correctly and safely. It that the case on your machine? Then the Z...
I can see a bug in your Gcode (not affecting your problem, must be quite an old version of that post cos I think I fixed that one), please use the...
