Separate names with a comma.
Some features disabled for guests. Register Today.
What size steppers do you plan to use? And are you leaning toward belts or screws?
Best solution posted so far. Could easily be done with 9/32" (7.14mm) brass rod and M8 nuts.
I have a copy of Autocad. And no software will simply show dimensions unless someone has intentionally put them on there (which isn't the case...
The drawing measures to 85.8685mm. This is based on c/c hole spacing of 79.8 and drawn holes of 7.1370 & 5.0mm diameter. The holes in reality...
@chadderuski, that distance should come up in the 85.9 to 86.1 range. You may have a set of the version 8.0 Ox plates which did have the holes a...
As it's DC, I wonder what the potential for adding speed control would be. Might be a pretty good deal at $50. Not to worry, deals come and go....
A lot of times when tools appear to come from the same factory under different labels the difference is in the specs. And generally the cheaper...
Sorry Joe, as a licensed structural engineer for over 20 years it was my job to explain to the "designers" when they were off base and your...
I have to differ here. Fixity implies infinite rigidity at the connection. The plates (and other frame parts) we bolt into have some level of...
Have you checked Elaire for something compatible?
Use either the contact form or email them at http://support.openbuilds.com/support/home
First you need to determine if you actually need 3d CAD to design this. Most of my designs never go past 2d plan and elevation sketches and I...
Brief discussion on the subject here.
Truly depends on what you want to do with it.
The anti-backlash nut was a recent addition to the shop and many of the videos may predate its existence. For the Z-axis on a printer its use is...
Order up an extra 1m section of C-beam and a 1m length of 8mm lead screw, cut them both to around 600mm and swap them out for the 500mm sections...
Sounds like a nap is in order. Just remember to set the alarm for midnight. As the fine print says, in stock items only so be sure and get the...
The problem with all this is that when you wrap a GT2 belt around a 5mm bolt the thickness of the overall piece is roughly 7.2mm. The width of...
The sale info has been posted on the openbuilds store site.
You are correct, the example doesn't work. It appears they were trying to trim down the one immediately to the left and didn't quite think it...
