Separate names with a comma.
Some features disabled for guests. Register Today.
I have a feeling she prefers Trish (rather than al). ;)
Considering a year ago most sizes of V-slot (as well as many other parts) would be out of stock for 2-3 months at a time and now lack of...
I can't help with the first part of your question but you can get more readable dimensions and a model from the Sketchup file posted here. Note...
@Dekes1, can you give us an approximate shipping date? (So others who purchased around the same time can take a closer look) Also, have they been...
You are confusing several concepts here. Your machine will have 3 axis, 4 motors, and 2.5D motion. The stated number of axis a board can...
That is already the subject of another thread. Let's please try and keep this one focused on the original subject.
The 20T pulley requires a 1.5mm.
What you are referring to in regards to breaking up large works into sections is called toolpath tiling. A brief discussion on the subject is...
@SatMike, where are you finding these prices? I can't seem to find anything close to that.
What you are considering has begun to stray too far from the above example. A 300x400 table is far too big to be stable on such a narrow based...
@sfbayman, based on measurements you should be able to fit up to 12.2 mm diameter down through the slot which would be pretty tight but doable....
Sorry, I was measuring the side plates. The X-axis carriage plates are even worse at 78.87 mm. These should be no less than 79.7 mm. The wheel...
The Rev. 80 file shows the vertical hole spacing at 99.3615 mm which is too tight. It should be 99.7 mm at an absolute minimum to work with the...
If you are looking at built-up sections to increase the gantry stiffness, consider aluminum tubing. As all the material is concentrated at the...
Here are a couple of threads which you may find useful. http://www.openbuilds.com/builds/time-lapse-camera-rail.1307/ and...
8x16x5 bearings to fit the current V-wheels on an M8 hub are available in the parts store. Regular 5/16(8.1mm) x 1/4" spacers can be found here....
Ref: http://www.openbuilds.com/threads/cut-to-length-machine.1240/
