Separate names with a comma.
Some features disabled for guests. Register Today.
I wouldn't trust it to stay centered on a geared system. As noted above, I still need to work out some shims as there is a couple mm of play in...
There have been several comments posted regarding the ox and other GT3 belt driven systems seeking suggestions on how to reduce the rate of motion...
SHOWCASE!!! :thumbsup:
Interesting. Odd that one part of the province gets it and you don't. I can see it on both US ebay and ebay.ca from the US side. Do a search...
Opened fine in 2014. :thumbsup:
Any chance you could post that in a lower version of Sketchup? Those of us still on XP can't install version 15. Thanks.
Please don't perceive it as skepticism. It was more of a case of just askin'. And yes, options are always good.
Are you controlling all 4 motors off one driver?
Unfortunately there does not appear to be a central repository for the V-slot parts. Some parts can be found in the resources section of the...
You can download a number of different file types for this size pulley here or here.
Sorry, I missed the openrail part. You could easily drill and tap into the flanges of the larger sections but the lack of a square corner to...
From the quick mash up below, you can see that connections between 20x40 V-slot and 40 series 80/20 will be difficult. You will have similar...
A thin plex or fiberboard shield running along the edge may be just as useful as reversing the plates to protect the belt. [ATTACH]
The nuts and collars from dumpsterCNC and Ebay are far more reasonable.
The Modulus on the CE is 1.6 (x 10^6) so it is a noticeably less stiff than the G10 but it should be fine for small plates. If you are looking...
Really, you are just going to have to visually reference them back to the parts store. The problem is that every time you use a component in a...
Modulus of Elasticity of aluminum is 10 (x 10^6) psi Modulus of Elasticity of G10 is 2.7 (x 10^6) psi lengthwise and 2.4 (x 10^6) psi crosswise...
It's under the product description. "These are standard 20mm x 20mm x 17mm (with a 4mm wide T-slot tab) and is used to connect (2) V-Slot or 20...
Smooth movement across joints is as much in the wheels as it is in aligning the joints. A better explanation is provided here:...
Can you provide a photo showing how you have it hooked up? Is the 115V/220V switch set properly?
