Separate names with a comma.
Some features disabled for guests. Register Today.
You may also need a spacer block to bring the plate out past the nuts on the Z-axis wheels.
Wow Serge, just scanning around ebay.ca and you all really do get the short end of the stick up there. I didn't realize how much of the 'free' US...
I have been contemplating JB Welding some rack onto a backer bar of matching thickness to where I have enough width to drill mounting holes. Any...
Don't get too upset when she's more focused on what's in the box rather than the box itself. ;)
Try here: https://sdp-si.com/eStore/Catalog/Group/217# In the left column: Pulleys > Metal timing pulleys and: Belts and Cables > Timing belts...
If you do decide to cut your own plates, at a minimum, get a V-Slot Gantry Plate to use as a drilling guide/template. Through careful and...
No reason it shouldn't.
Serge, don't get your hopes up on that power adjustment dial. It only gives roughly 10 percent each way.
I'm back. Thanks Mark.
It might be a good idea to check your spam filter then.
The best suggestion is to contact the store to find out when the they expect the missing parts to be back in stock. You can either email...
Click on the "More Options" button in the lower right corner and when the box opens up, check the receive email box.
I suggest you spend a little time looking through the 3D printer section of the forum. You will rapidly come to the conclusion that what you...
Doesn't look too good. You could probably drill and tap the top one 1/4" off the edge but that is about all you have to work with. Using the...
Can you provide a photo? End shots with a ruler in the photo would be helpful.
Not a great photo but everything looks appropriate. You might contact the store letting them know of your issues and ask it they can set up a...
How big do you plan to go with it? And if you are trying to go with two motors, have you considered a Core[X,Y] belt system? (Ref also...
You may be able to get the parts you need from someone like Grainger or McMaster but it's the kind of system you will have to fully develop...
You will need a far more substantial system than the one shown for the loads, lengths, and speeds desired. These are hobby grade materials that...
You could always start simple by just installing dual screws to see if that solves the problem. McMaster is a good source for screws. You would...
