Separate names with a comma.
Some features disabled for guests. Register Today.
An all-in-one concept is not in any way a bad idea, but you will find the inherent Z-axis limitations of the OX platform to be a bit too...
How deep is the broken end? Is there any way to saw a slot across the end and use a flat blade screwdriver? Actually would be better off to...
@Derwin Palacpac, search through the forum for tensioning clips. There are several good examples that may solve your problem. Also check with...
Done.
PM'd
You could always check locally for rental equipment or check to see if you have a local hackerspace where you could cut it. Ultimately however,...
Nope. You had a valid question. :thumbsup: That's why the forum exists.
Nope. If you'd like to test this theory, laminate up several pieces of lumber and test them against a solid piece of the same size. Assuming...
Chris: as asb_79 notes, the difference here is between flexing and bending. Flexing is done within the elastic range of the material and the...
@Chris Laidlaw, I need to provide a little background information here as strength and stiffness are two entirely different and unrelated...
I'm currently working up a mini-mill for this very reason. :)
5mm plates will have 42% less stiffness than 6mm plates which means they will be considerably more flexible. How much of an impact that will have...
If you're thinking 300mm is close to either of those two choices, I'd have to agree. o_O Seriously, if you can visualize 4" you can visualize...
Bonding the two plys together will double the strength and give you 4 times the stiffness (about the weak axis that is). You might check to see...
Mehman, this subject has been touched on several times in the forums. Unfortunately all the best suggestions are not located in a single thread...
A simple solenoid should do the trick. [MEDIA]
Robert.... If you'd finish that machine you keep using as a display prop, you could turn out a whole lot more plates.... ;) Just sayin'....
Yes, racking is an issue but as most of the CNC designs move the gantry rather than the platform, there hasn't been much effort focused on a...
Actually you're not getting thick, it's just a case of for 73 years you have known that a screw thread is one continuous thread from one end of...
I was kinda partial to the auto change bit tray.
