Separate names with a comma.
Some features disabled for guests. Register Today.
As both PCs do it, any chance you used the same monitor? Does unplugging cable between PC and Monitor open the short? (HDMI's DC GND and USBS DC...
Unlikely to get added soon. Can add yourself macro files on the USB for it. But in practise, manual control really shouldn't be needed. CAMs all...
Add it to your gcode headers / footers.
Most likely the LM 358 just behind the 0-10v potentiometer.
Sounds mechanical. Either Z binding or slipping. Check wheels, leadscrew, nutblocks, grubscrews tight on shaft coupler. Could also be...
Sadly not, unless you have board level repair skills and surface mount soldering ability. Rarely economically feasible to pay someone for that,...
Yes!
When you flashed the Blackbox did you use the "and erase settings" option? If so, reload machine profile (CONTROL > Grbl Settings tab > Select...
Did you try updating Interface firmware? Perhaps had it on the wrong tab? Flashed BlackBox firmware onto Interface? Try reflashing Interface from...
Reread manual. PD002 =1 for Potentiometer
Loose or broken wire: docs:blackbox-x32:faq-identify-motor-coils [OpenBuilds Documentation]
Stop reflashing, and read the onscreen error. It directed you to docs:blackbox-x32:faq-usb-connection-failed [OpenBuilds Documentation] Fix...
Don't forget to add details as requested
Normal. No. Short inside desktop. Fine on laptop - pointing finger at Desktop. Fixing: replace desktop PSU, or look for shorts (chaffed through...
Short between AC EARTH And DC GND somewhere in your system From the symptoms, desktop PC shorting either in PSU, or motherboard shorting to case
Will be settings. Has to be enabled as the source of frequency. Post the VFD manual so we can help read, or (really) ask the Vendor. Its a 3rd...
Just keep in mind we aren't expecting the PSU to resolve your motor issues. PSU is to get clean safe power to prevent blowing up the Blackbox (:
You can recompile Grbl to change the homing sequence (we have precompiled to disable Z but with a custom compile you can set any axis to be...
Contact the Vendor you purchased it from. They should know their own product better and be able to advise which parameters to change to choose the...
Once you get a https://docs.openbuilds.com/xyzprobe you'll never miss jogging again. Its really our recommended way to zero
