Separate names with a comma.
Some features disabled for guests. Register Today.
(: Sounds like that was it. The defaults are best.
Checkout around 2 second mark [MEDIA] Its a "computer replacement" You cannot have two hosts in charge of the same controller. Same. Interface...
That is an analog input motor controller. Most laser PSUs of the last decade or so could run off 3.3v PWM as many of the laser DSPs are 3.3v too
Settings good for a Blackbox 4X. So wiring most likely then. Acceleration quite high though, we run around...
Update to the latest grblHAL firmware : Use http://svn.io-engineering.com:8080/?driver=ESP32&board=BlackBox X32 to build the latest firmware and...
Unlikely the store would replace based on your symptoms. Random moves are always wiring or Grbl Settings (or occasionally 3rd party motors) and...
Also check Grbl Settings (welcome to post a backup for review)
Get your whole setup working on PC first. More beginner friendly. Follow the docs https://docs.openbuilds.com/blackbox-x32 and videos provided....
Pwm = pulse width. The voltage doesn't matter, PWM inputs measures the timing between the up and down sections of the pulse train. Where the...
1) use Troubleshooting tab to test switches (all working, and plugged into correct axis?) 2) did you remember to enable Hard Limits in Grbl...
Exactly. The same EMI that corrupted your serial stream to the point of showing non existant axes, is also corrupting the stream causing stoppages...
Remove the Autoreset jumper docs:blackbox-4x:jumper-autoreset [OpenBuilds Documentation] - your computer is triggering the Autoreset everytime it...
If you think it doesn't, you also didn't read 7.2 Relates to an old firmware bug.. See the Changelog in Section 7.2 of the BlackBox X32...
Checkout [MEDIA] And [MEDIA] Also check out the kit: OpenBuilds LEAD Plasma way easier than DIY [MEDIA] And no, you don't need the...
Use our recommended 24v PSU and Our recommended settings (CONTROL > GRBL Settings tab > Select machine from the list > Save and reset when...
We don't offer that service. You can flash firmware directly from CONTROL by yourself. See section 7.1 of the BlackBox Documentation
Docs.openbuilds.com > Interface > Firmware Update section. Latest is V1.57
Post a fresh Grbl Settings Backup please If I load your last backup from the other day onto an X32 - Home it - Run It ends up right where it...
This one is more marketing for the adapter, thats probably not even tightened down. You do want to clamp lower usually, but not so low on the...
Homes Z, then homes XY? 1=X 2=Y 4=X $44=4 thus = Z only $45=3 - to get 3 you need 1+2 = X and Y. Would be $44=4 $45=1
