Separate names with a comma.
Some features disabled for guests. Register Today.
Reset eeprom, flash stock firmware (or flash with the And erase settings option). Should work
Shouldn't make a difference, but if you need out help, we know CONTROL (;
Well, BlackBox was preflashed, so that would have been fine. Lets assume something was configured wrong, rather flash CONTROL > Wizards and Tools...
Door as door. 3D Touch and Tool Length in parallel (Both NO) or Series (Both NC) or via some switch/plug arrangement - both on the same probe...
With a custom pinmap and recompilation, you can move stuff around. Tool length is just a normal probe operation though, some folks just place the...
Defaults all the way (PWM)
Rather, post your issue, and screenshots, fusion file, details on which post you are using etc - would be more helpful than a short form follow up...
With the same motor, yes, higher voltage = more speed. But its not the same motors. Its newer, its custom made for us, its not the 1990s high...
Just the thing that was popular at the time. Mach3's been dead since 2012 BlackBox will do just fine. You are pairing our motors, with their...
Its a CAM not a CAD, basic shapes/text is just for simple signs etc docs:software:overview [OpenBuilds Documentation]
The onscreen error is just operator pressing the jog buttons too fast
Sounds like you are missing something. 1) Open a CAD File in OpenBuildsCAM 2) Setup some toolpaths (valid toolpaths, simulating, gcode generated...
Video is a couple years old. Adapt to whats onscreen (save then open in control)
1) Check your own memory - do you remember changing anything? 2) Otherwise post a Grbl Settings backup for review (Backup settings button on...
Grbl v1.1 Configuration and Grbl v1.1 Configuration (That Grbl Wiki is a must read to understand the firmware)...
Unsure, but ours are cheap enough for a quick test. It might now work, but worth a chance?
It is on that page [ATTACH] Is also covered in the Wiki see Grbl v1.1 Interface
Math is correct, but machine not moving as much as commanded throws things off.
Revisit section 4.1 and complete the driver install for Windows from the Silabs link
Sounds like either loose setscrews on shaft coupler, wiring (break intermittent on one of the 4 wires) or unexpected Grbl Settings change (max...
