Separate names with a comma.
Some features disabled for guests. Register Today.
I replied to your question about the 3rd party motors. They'll "work" but "as good as ours" because of the technical differences highlighted in my...
Will work, but they won't perform as well as ours. High current rating, but mainly those tend to be High inductance (self braking EMF limits top...
You can still use it with CONTROL PROBE wizard > Probe Type > Custom > click the Gear icon > set your dimensions as offsets. No macro needed
The best is not to (: Rather, rough out with something bigger like a 1/4 inch or you'll take forever, signs tend to be bigger pieces. Then come...
You need a controller running Grbl 1.1f or later. V2 likely runs Grbl 0.9 (2015ish) You can try older software like grblPanel from those days...
They will perform better yes
Yes we just run electron-builder Electron Builder to package.
I don't use VSCode myself, so can't confirm, but glad to hear someones picking up the FluidNC work. Make sure to check the todolist on FluidNC...
They'll work, but be a little slower (higher inductance) and lower torque (based on amperage) than our motors.
Well, your GCODE tells the machine what to do, so if you'd like a review, you will have to include the gcode please...
With VFDs spacing sure helps, but if its not earthed, and the 400hz 3 phase AC is running up a long length of 3 core without shielding. And that...
Symptoms point to either: 1) Forgot to do docs:blackbox-x32:install-windows-selective-suspend [OpenBuilds Documentation] or more likely 2) EMI:...
Personally, i'd hunt the specs before hooking up power. Just in case its, say a 5v sensor, wouldn't want to wire up 24v
Look at it closely for label, or model marking and lookup datasheet to confirm - voltage expectation (BlackBox can provide 5v or 24v, and accepts...
Can be used - "IF" is NPN type: docs:blackbox-x32:connect-npn-inductive [OpenBuilds Documentation] The X32 allows per-switch inversion, so yes....
Settings aren't stored in CONTROL at all Its stored ON YOUR CONTROLLERs EEPROM (:
Sounded like you modified the post. Good then, if you home properly the post and CONTROL will work. Theres another option on the dropdown, thats...
Contact the store via Support to order a cable
Right track with the divider :thumbsup:
Just make sure that 3rd party spindle controller doesnt overload the output, nor backfeed - have seen some ESC/Brushless controllers from the far...
