Separate names with a comma.
Some features disabled for guests. Register Today.
Your CAM essentially uses mm as degree. See Post #26 in LEAD Lathe Or grab the newer BlackBox X32, that runs on the newer grblHAL and has proper...
Edit the macros to view the source and copy/paste the relevant gcode/js to a text file to use to recreate them.
Check in the Wizards and Tools menu Could be EMI: docs:blackbox-x32:faq-emi [OpenBuilds Documentation]
Is that wired up at the moment (or why post the old stepper drivers?) The [spam] vendor that made that machine uses notoriously high inductance...
Make sure to set your probe dimensions under Probe type > Custom > Gear icon on the Wizard (bottom)
Yeah the only feature we deprecated was the one-button "transfer gcode" (To avoid need for constant CONTROL updates every 90 days when certs...
Integration has been suspended - use the Save Gcode button (it works fine) CONTROL install and registration is once off too All the random...
Checkout How to calculate V-Slot® deflection And around 6lbs per V-Wheel
The firmware has no way of knowing why it booted up. Power up being the minority. Resets happen all the time. Alarms, errors, crashes, EMI...
See error with Fusion 360 and Openbuilds post processor? You need to set the WCS offset [IMG] Just like the onscreen message tells you to. It...
2) There was a macro somewhere here 3) It runs a service so the integrations can work. It uses no active resources while sitting in the tray, UI...
Can also add the M8/M9 to your CAM workflow (Header and Footer gcode) that way the job can control it (say on at start, off at end or whatever)
That rather indicates a short through the PC - try a different PC, or if the computer has 2-pin power plug - try flipping it around.
Not surprising. [ATTACH] Yup, haven't updated since Release v1.0.312 · OpenBuilds/OpenBuilds-CONTROL That was Jan 11th 2022 [ATTACH] Staying...
Please use Tech support for Javascript Macros in CONTROL for SUPPORT - don't use this library thread - we want to keep it clean. As for how to...
Negativbe, that is not what I said no. Read above
Please note our support team has responded to your earlier ticket about the same issue. Thanks
CONTROL supports grblHAL's Telnet interface as used on our controllers, e.g the OpenBuilds BlackBox docs:blackbox-x32:start [OpenBuilds Documentation]
Export each toolpath on its own. Perform toolchanges between operations. Run each file as a job with its correct bit. If its an already setup...
OpenBuildsCAM doesn't show the stock.
