Separate names with a comma.
Some features disabled for guests. Register Today.
You forgot to setup MinFreq in VFD parameters
See post #19 above for the link (right above your question)
Its free so give it a test. Use the search above for Bitsetter, there is a Macro
Touchoff should be a Probe not and Endstop
We provide the standard 0-10v signal. Everything else is VFD manual / VFD vendor side - i.e how to configure your 3rd party VFD to accept an...
Multimeter on the VFD terminals you want to use, before hooking them up to BlackBox
It never hurts to use a couple cheap amazon bits for the learning curve. Less painful when the inevitable breaks happen. Speeds and feeds...
See Converting Sain Smart Lead Machine to BlackBox X32 - Axis Swap
Then your spindle Body has a Short to DC GND somewhere: XYZ Probe Plus with VFDs and other ground-loop inducing components Sort the wiring short...
Pictures please, instead of videos. We just want to check the wiring itself quickly. Please follow instructions so we can help you sooner Will...
Perfect. So what happens when you clip the Magnet to the Collet? Does it turn Red immediately
OK so with the 4X and our probe, set $6=0 To clarify, what happens when you touch magnet to plate? Probe indicator on troubleshooting tab turns...
CUSTOM sets those too, so perhaps you changed some of the defaults after? So you have the BlackBox 4X? or the BlackBox X32? If its the X32, at...
Depends which version you have X32: $6=1(Enabled) 4X: $6=0(Disabled) If troubleshooting tab isn't reflecting status, you might have skipped the...
Unfiltered switches can be troublesome, it might be worth buying a couple good reliable switches with onboard filtering that also just plug and...
Fantastic! Hope you enjoy the controller and software! Shout if you need help with anything!
GitHub - OpenBuilds/OpenBuilds-Fusion360-Postprocessor: Post Processor for Fusion 360 for use with OpenBuilds Machines running Grbl 1.1
He answered that question for you here already: OpenBuilds CONTROL Software
Thanks for the Share, in theme of this thread, could you include some eye candy, screenshots etc (: - scroll up for some examples of how its...
Y2 is the Slave axis and can be set as a slave of X, Y or Z - so not quite a "swop" but X1 on X, Y on Y, Z on Z as expect, then wire the 2nd X...
