Separate names with a comma.
Some features disabled for guests. Register Today.
Fantastic (: - but just remember I can't remember all the thousands of people on here's specific setups (; - and will always advocate for others'...
E-Stops MUST cut power. A software pause is useless when the router is busy degloving your hand, or your PSU is on fire. Real history... Not fun
Our screws 8mm Metric Acme Lead Screw are "TR8*8-2p (4 starts)" which is a 4-start screw, with 4x8mm helixes (intertwined you'd see a thread every...
If the holes lines up somewhat, even with some addtional drilling, I'd suggest the existing plate > alu spacer > Spindle body via the bolt holes....
If you want to confirm legitness of any parts, you can check in with the OpenBuilds Partstore. If the last addition of the laser caused things to...
Well, not from a genuine distributor, so how to identify fake meanwell - Google Search If they can rip off our stuff, they can rip off others.
Same as before
Interface can run gcode macros (Just save them to USB just like a normal job) but not Javascript Macros, that needs a computer
Yeah is something externally cooked the microcontroller it won't boot up anymore, to enable lights. I meant on the laser module - we are...
If you don't need the 1/8th, remember a 1/4 inch is more rigid. Use the biggest endmill for the bulk removal, cleanup with the smaller endmills if...
Then the real task at hand becomes an autotopsy. Measuring for stray voltages on the PWM pin off the laser (its an input so should not have any...
Theres a couple, if you click through to the link provided in the error message, which is docs:blackbox:faq-usb-connection-failed [OpenBuilds...
As mentioned The onscreen error already points you at the comprehensive list of causes One of which is sadly permanent damage, so that is a...
Per the error, we direct you at the comprehensive guide. Would not rule out damaged caused by laser module (backfeeding?) or even the VFD. The...
I use the spray one with the little tube on it, but either is fine. Just helps the leadscrew through the nut a little easier.
I wouldn't advise you to, but just take our word for it. We've looked for good cheapies for many years now. They always fail our standards test in...
Well Source - with specific attempt to make it look like a Mean Well Logo, seems a bit deceptive. We never trust without validation. If you have...
Fix spindle wiring, swop any 2 of the 3, 3-phase wires between VFD and Spindle
Could try a little Dry/PTFE lubricant on the leadscrew first (Don't use oils, it will degrade the delrin/acrylic components)
Adding insulation surely does help - but in a "doctoring the symptom" way - sure you no longer see the problem, but it might still exist. And...
