Separate names with a comma.
Some features disabled for guests. Register Today.
Not "needed" but make sure to do your terminals properly: Wire inside (not underneath) the moving cage Wiring stripped to correct length (not...
Set to $1=255 Have a read through the Grbl Wiki
BlackBox is strictly 24v! Connecting the 48v PSU will blow it up and not be covered under warranty Ideally you want motors with 3-6v coils, 1-2mH...
You are running MAINS through a low voltage signal relay! This is DEADLY! No no no. Please please remove immediately and follow the documentation...
OpenBuilds CAM is Metric only at this time
1) try a different computer as a test 2) could also be EMI: docs:blackbox-x32:faq-emi [OpenBuilds Documentation]
Now you see why we insist on the Meanwells we supply (:
Parallel is a little harder with Inductives. Easier option: docs:blackbox-x32:connect-xtension-limit [OpenBuilds Documentation]
Well, Relay1 is not documented for use in any of those devices (Router nor Laser) Can you post some pictures of your wiring please
Plenty on Google rattmmotor 4 axis board mach config - Google Search For us to help, you'd have to have our Products (Understandably). Good...
Your post title says its a CNC. Is it a Camera Slider? What exactly is it. Include some pics, so we can see if its a good match for our BlackBox...
Pause/ Resume buttons are present in CONTROL. Overnight pauses are fine. Lifting the router up requires a Door and Parking config (Custom...
If you want a good experience, grab a proven, documented, with detailed build videos OpenBuilds machine - the Ox is almost a decade old, was good...
Probably, but to confirm we'd need to see the Electrical specs of stepper motors. Also good idea to get some Xtension Limits and our PSU (Bad PSUs...
Please contact the vendor you purchased it from for technical support, or you can check out the Blackbox at https://docs.openbuilds.com/blackbox-x32
If you use our post you don't have to do anything. We take care of everything. You just remember to HOME, SetZero and Run. Standard for all...
Unfortunately not available at this time. Custom endmills are also not yet an option. You'd either have to 1) probe with a dowel pin (more...
Yes, see added x#@ 4axis post. This is a Beta, test, test and test some more … · OpenBuilds/OpenBuilds-Fusion360-Postprocessor@2df201b
Yes please recommend our Post - best customer experience and what folks around here will be expecting when providing support. Deleting Gcode is...
Fusion post documentation is over on docs:software:fusion360 [OpenBuilds Documentation] Big green download button, and onscreen instructions...
