Separate names with a comma.
Some features disabled for guests. Register Today.
If there's a G28, its not our Post Make sure to use the OpenBuilds Post Processor. No G28 weirdness. Just needs you to Home (Simpler to...
Note that would be a workaround. The real problem might be bad AC Earth to DC GND coupling somewhere else. Always better to locate the root...
Check grubscrews on pulleys. Make sure you have grubs on the Flat face of the D-shaped motor shaft and properly tight.
Check out your VFDs manual, and ask the vendor you purchased it from. your Spindle vendor (To provide parameters to match spindle to VFD) and...
Its in docs:blackbox-x32:connect-vfd [OpenBuilds Documentation] Check that you do get 10v at Max RPM (Using Tool On menu in CONTROL, or M3Sxxxx...
Have you tried the Blackbox Documentation? Incorrect wiring could also have caused damage so do the multimeter check and calibration step as...
Spindle EMI: see docs:blackbox-x32:faq-emi [OpenBuilds Documentation]
Understood, but as is, only keypresses as shown in the wizard is understood by the application. Anything else you want to do is either programmed...
Plasma? Replace tip and electrode (worn tips often reason for cut artifacts) Also double check your kerf is configured correctly
Recheck all your VFD parameters
CONTROL accept keyboard inputs. Any other device you want to use is only usable if it can be configured to pretend to be a keyboard.
A-Axis shortcuts is coming soon, but not available at this time (next version) Other axes are already there, in Wizards and Tools > Customize...
Using a post processor. I don't have one at hand, but checkout Post Processor Editing
Have a read through Grbl v1.1 Interface and the sample code at grbl/doc/script at master ยท gnea/grbl 11520 != 115200 (;
Dual Motors on Y1 is the correct way and works fine Aspire is not quite a 4-th axis CAM, so may need a post to wrap around A instead of X/Y as...
Holes still oblong?
See my earlier reply, exact same situation. Interface mount causing magnetic interference Finding and addressing the source of intererence is...
Checkout the new BlackBox X32 that runs grblHAL (https://docs.openbuilds.com/blackbox-x32)
1) check mechanicals (setscrews on shaft couplers tight, wheels adjusted, machine as solid as can be) 2) then check Calibration (Wizards and Tools...
Use https://inventables.zendesk.com/hc/en-us/articles/4406926040979-Exporting-Gcode-From-Easel
