Separate names with a comma.
Some features disabled for guests. Register Today.
Did you use CONTROL to load a machine profile, or setup all manually? Our profiles sets reporting, if its been done manually check your $10=511...
In Grbl the host application has to do all the work. grblHAL takes over some of the hard work, but both still needs work on the host application...
M8 is for the coolant port, and easiest option to use: docs:blackbox-x32:connect-coolant [OpenBuilds Documentation] Buy a 24v Solenoid.
Correct. To have a reversed Y2, reverse its wiring, see the documentation docs:blackbox-x32:connect-nema23-reversed-y2 [OpenBuilds Documentation]
Sounds like a solid plan Wiring is easy - just checkout our Youtube channel too - have some videos for our machines - a lot of it translates to...
Checkout docs:blackbox-x32:start [OpenBuilds Documentation] and work through it to see what goes into the wiring. Motors are extremely unlikely...
Yeah then thats a problem. Looks like you are learning Fusion 360 - nice to be up to date for a change
You will need an additional cable. Contact the store when you order the new one, so they can help you get the correct one. See...
Our list of recommended CAMs can be found at docs:software:overview [OpenBuilds Documentation] Have you emailed your MasterCAM vendor (or...
Yes, should be fine. NEMA17 at 1.7A with 3V coils = 3v x 1.7A = 5.1w per coil * 2 coils = 10.2w for the motor. Factor in some losses in driver...
Post the file so we can see what they do. Perhaps theres a Z move at that time (Do you have a Z axis)?
Check out Toolchanges · Issue #26 · OpenBuilds/OpenBuilds-CONTROL and feel free to comment in there - it stalled out with Grbl itself for several...
Well thats theoretically a $0 fix - find a Grbl compatible post for your choice of CAM - reach out to mastercam they'll probably have on right on...
How do you mean? Can you elaborate?
Correct, its been designed from the ground up for power - typical of our machines - workhorses
You'd need a 1.7A motor: NEMA 17 Stepper Motor or larger BlackBox plays with the big boys (:
The heavy weights may affect laser ability. For lasers a light machine like an OpenBuilds ACRO System is more suited to the demands
Just make sure to Post with compatible GCODE format See above (Quoted below) OpenBuildsCAM is beginner friendly, basic. If you like Mastercam...
Also looks like a low pitch leadscrew - is it by any change a heavy ballscrew (enertia limiting acceleration?)
One issue, the odd Arc there, shows its not a Grbl compatible Post (other clues like "%" tape start/end chars, Line numbers etc confirms - not...
