Separate names with a comma.
Some features disabled for guests. Register Today.
You set Cut Depth Start to 2mm, and Final depth to 2mm. You can't start and stop at the same depth. Set start to 0 - thats more useful if you...
The Grbl Wiki explains it in good detail, but basically try half the current values and see if it makes a difference
Make sure to use CONTROL > Grbl Settings tab > Restore Backup if you decide to apply this backup, so that it applies the necessary 4X > X32...
1) CONTROL > Wizards and tools > Calibration to check machine calibration 2) Make sure its not mechanical slippage (Shaft couplers tight, etc) 3)...
Make sure you did review the documentation (Interface and BlackBox X32 both) and did follow firmware update steps on both. The lockup looks like...
Something here still seems odd. 0v should be Router OFF. >0v (ie above 0, to 3.3v) should turn on the spindle. Is your Spindle controller...
See Post #9 in BlackBox X32 V1.2 Relays ? Please elaborate, lets see if that could be part of the issue Yes, but what is the torch pilot...
Sounds like EMI. See docs:blackbox-x32:faq-emi [OpenBuilds Documentation] Are you sure your plasma is CNC compatible (Blowback/LF)? In...
Please start off with one of our profiles, at least the CUSTOM option if nothing else - to make sure key parameters are set correctly.
And don't forget to load a machine profile: CONTROL > Grbl Settings tab > Select machine from the list > Save and reset when prompted
Don't forget to follow the Interface setup instructions. Missing profile file indicates you skipped over section 3.3 of docs:interface:start...
Correct, if its not able to load into the editor, we can't edit it. Sorry
Follow the instructions in the Macro post (Its a tool offset handler, doesn't split gcode files) , or modify the macro according to your own needs
Don't forget to load a machine profile from Grbl Settings tab in CONTROL / Tools and Utils on Interface
Sounds like you forgot to home, or didn't set Homing up correctly Not related to the CAM issue. Post the export so we can see what your parameters...
Please post the workspace export
Ps, we almost never see motors go bad (simplistic devices, not much can go wrong other than shipping damage bending a shaft or knocking off a...
USB keeps powering the microcontroller. 24V is just turned off (motors, 0-10v, auxilary 5V stepdown, etc) - while powered of USB you haven't...
Check if things around $33-36 from Additional or extended settings looks sane too Normally the update goes smooth, and since the PWM/0-10v section...
Still sounds like Grbl Settings / Pin Inversion
