Separate names with a comma.
Some features disabled for guests. Register Today.
Its wasn't a plated hole, so you don't need the shoulder - screw side has always been isolated, but the bottom pour was exposed. Pulled that back...
How old are your switches? Your suggestion has been implemented a while back
Should be fine. Lots of folks do. Just watch out for heat with that double enclosures (Make sure to ventilate the box) Usb: shorter is better....
3rd party switches? You should check out ours: Xtension Limit Switch Kit
As its custom, post a Grbl Settings backup for review please
Or 3rd party spindle? Any 3rd party components? Fixing EMI is an art, so you could take the shortcut of turning off Hard Limits (Use them for...
Correct, Hold signifies a Feedhold Send a 0x18 (Ctrl+x) as per the wiki Grbl v1.1 Interface - and our implementation in CONTROL...
That is fantastic news! Thanks for submitting the reports!
Are you testing by hand, or with the machine - it shouldn't trigger if you jog out of the switch (unless you have X plugged into Y or Z, or...
For CAMs where you cannot import the database, you are welcome to recreate it, or setup toolpaths manually: See sharkbits [OpenBuilds Documentation]
Never hurts to try a reboot (reset button on front of BlackBox). Glad you are back up and running
Well, all the way up is odd, so something is going on there. 3rd party motors? All the way up is 4A RMS and should be burning up our motors and...
Normal position at about 50% is fine. All the way up will cause overheating. Check for the red Fault Indicator to confirm Random disconnects...
A screenshot of the error or a log extract would be more helpful to help you from.
Poat your Grbl Settings backup for a review. Ps: use the Backup / Restore buttons in CONTROL rather than print/type in. More accurate and handles...
Max Travel. See the Grbl Wiki to learn more
As part of initial setup, tune the Current Adjustment. See docs.openbuilds.com/blackbox-x32 > the current Adjustment is in section 2.2.1 and once...
Contact the store via Support including a link to this thread for further assistance
If you unplug the Y switch completely from the controller, does it still show triggered (unplug at the controller, to also eliminate any chance of...
Per the video his buttons works fine. Soft limit calculation stops the move per max travel. Disabling soft limits eases learning curve, no need to...
