Separate names with a comma.
Some features disabled for guests. Register Today.
CONTROL just acts as a middle man between the GCODE and the FIRMWARE. It sends the gcode along, if the firmware doesn't like it, the firmware...
Will have to dig in, we do try to chmod (add executable permissions) to esptool.py, but we are being denied there for some reason. It used to...
Contact the vendor you purchased your controller from, they should be better positioned to assist. If you do need a replacement controller,...
False. You don't have to select anything, Grbl Settings already knows. Just select a machine from the list (don't forget the Save and Reset when...
Ok then controller, grbl settings and software is fine. That leaves you with wiring the probe - something there is not making contact, go over all...
Good then your relays are fine, no need to dig deeper into that That will be the main difficulty, squashing the EMI... Lots of trial and error...
Correct, so follow standard Grbl protocol (seperate file per tool, use macro for toolchange in between), or you will have to modify macro...
Try the DEB
That's good, but we are playing the "elimination game" by doing a test with a short wire, instead of the probe, to see if the issue is with the...
The probe works like a switch. It closes the two pins of your probe connector together. As a test to see if the issue is controller, or probe...
Could be an issue with Python path Run openbuildscontrol executable from a terminal, with the DEBUGCONTROL=true environment variable to see the...
Good, well, then the Firmware flashing is not relevant Its only relevant to the BlackBox controller That leaves either a faulty controller (test...
Then if 1) and 3) has been done, it still leaves you with more of (2) to look for Assuming of course calibration was done correctly and over the...
Are you using our controllers? BlackBox? 4X or X32? Awaiting your testing on the other point(s)
Candle support old versions of Grbl too. CONTROL has a cutoff of Grbl 1.1 (2016 and newer)
CONTROL is for use with machines powered by Grbl or GrblHAL.
150 to 300 is double, not half Instead of random things, 1) Half Acceleration and 2) Half Max rate. Leave the current setting alone, it wasn't...
Which controller do you have? BlackBox 4X or BlackBox X32?
Until it reflects correctly in the Troubleshooting tab, don't try probing you will damage endmills. 1) make sure you have a machine profile...
Make sure to uninstall, cleanup (including old startup items) and then reinstall to see if V1.0.370 satisfies your needs
