Separate names with a comma.
Some features disabled for guests. Register Today.
Intermittent wiring fault. Something like a loose terminal that loses contact when the machine moves and tucks on wiring. The text message of...
Post the files. Gcode, vectric both. If it looks right in the preview it's the machine. If its wrong in the Preview its in your CAD/CAM setup
Should have the Openbuilds post built in, as per the first section of the aforementioned documentation (download post is for older versions) Also...
Checkout docs:blackbox-x32:faq-identify-motor-coils [OpenBuilds Documentation] If its a Blackbox X32: set $44=3 and $45=0 If its a Blackbox 4X:...
The 0-10v is logic signalling only. If you connect that to a solenoid you will damage the Blackbox To drive a power solenoid, use the COOLANT...
Read the Vectric documentation hand-in-hand Post-Processor Management
Some Androids has a feature called "smart wifi" or something like that that switches data back to Mobile data when its on a Wifi that doesn't...
Follow the link provided - you cannot export gcode out of Vectric without a Post (its not a seperate step)
You sure there're no wiring shorts that could have damaged the BlackBox - same symptoms, might just be coincidence around the time of flashing
Which Post Processor are you using? docs:software:vectric [OpenBuilds Documentation]
That, is an INTERFACE, not a Blackbox
See Getting started with Javascript Macros in CONTROL / Library of Macros created by the community [IMG]
Well then:
1) Grab a USBtinyISP from Amazon or similar 2) Plug it into the ICSP port 3) Arduino IDE > Uno > Flash Bootloader Same as this, but BlackBox...
Did anything happen like unplugging USB before it was done? Could have wiped the Bootloader? (You'll need a $3 USBTinyISP off Amazon to reflash...
Did you try 370?
You need to complete a successful flash. Try again
BlackBox 4X : flash the 2-axes firmware from. Wizards and Tools > Firmware flashing tool BlackBox X32: define your homing sequences in Grbl...
That would indicate the ESC backfed and killed the BlackBox. Sorry for the loss. If you do want to attempt something odd like that next time, do...
1) Make sure your Interface Firmware is up to date (V1. 57) 2) Try a different phone 3) Make sure Interface is fully booted up and on the Jog Screen.
