Separate names with a comma.
Some features disabled for guests. Register Today.
You can try V1.0.370, but even 1.0.369 works for me: Definately a phone problem / network / etc Give it another go, making sure to force-refresh...
Post a screenshot please, next time it happens
1) have you updated to latest CONTROL 2) have you tried a restart (quit from the system tray icon)
Then the rest of the Lightburn specific bugs/issues can be taken over to Contact / Suggestions Just making sure, you have updated Lightburn to...
Plug in a USB cable and connect (USB cable provided. Wifi is optional use case, USB is way easier and the recommended method shown in all our...
For CONTROL is should be Disabled. CONTROL is metric internally and expects Grbl to report in mm. It handles Imperial conversion in the frontend...
The menu's more for for testing... Your GCODE does all that for you - IE lightburn adds it into the Gcode (S-Value) See docs:software:lightburn...
You shouldn't turn it on by hand using the Tool On menu before starting a job, the GCODE will.
Yes, you can create yourself two macros $32=0 and $32=1 respectively, or add it to your relevant gcode toolchains so laser jobs has $32=1 in the...
Only if you forgot to fit the Stop Collars - they perfectly constrain the leadscrew axially. Coupler just transfers rotational force (and should...
Impossible to be related, but you are more than welcome to checkout...
Grbl's comms are documented in great detail over on the Wiki Grbl v1.1 Interface Alternative, let CONTROL do all that Hard work, and build your...
Did you remember to turn on Laser Mode? Grbl v1.1 Laser Mode
Is your vectric up to date? If not, checkout Vectric Products - OpenBuilds Part Store - our Post is built into newer versions
Before we get into the intricacies of Lightburn, make sure everything works in CONTROL first. Much easier to a) figure out and b) for us to help...
2mm x 4 starts = 8mm pitch. Put it into a leadnut, rotate one rotation by hand and you'll see
8mm pitch = 8mm per rotation Standard 1.8deg Stepper motor = 200 steps per rotation Stepper driver (for example) 1/8th microstepping 200 full...
Not really rated, but documented for specific use cases. X32 is <3A (smaller than 4X to fit extra relay) Ps OP was asking about the 4Xs relay,...
That's the coolant output's spec docs:blackbox-x32:connect-coolant [OpenBuilds Documentation] Relay is something else. Max 6A (for BlackBox 4X...
Seperate suggestions. Pin swap, or wiring. With the Blackbox you'll wire X2 to the spare driver. Something else in your custom firmware config...
