Separate names with a comma.
Some features disabled for guests. Register Today.
BlackBox 4X uses the 4-pin cable BlackBox X32 uses the 6-pin RJ12 cable. For a short while there was a transition period where Interface hasn't...
Can guarantee you it normally works (always keep the total userbase in mind, if it didn't work by design, you'd have hundreds of users on here...
Have you updated the firmware first? docs:blackbox-x32:firmware [OpenBuilds Documentation] Setting up wifi is covered by...
Posting some pictures of the machine, motors, wiring, and anything of else of interest might elicit some comment Otherwise start by reviewing the...
Check machine calibration: Wizards and Tools > Calibration menu in CONTROL. Also make sure you are using the OpenBuilds Post in Vectric:...
Or consider the SuperPID www.SuperPID.com - Super-PID Closed-loop Router Speed Controller - closing the loop as well, not just speed control
(; tell him to open source the Eagle files and Firmware (;
Give it a go! Haven't tried it but as it just replaces the potentiometer and switch it should work. Wouldn't recommend it to just anyone as it...
Please post a full Grbl Settings backup from the Grbl Settings tab >×Backup Grbl Settings button
Tracing draws each shaded area as an SVG path. Each path has an outline, including adjoining ones. Going to be better to redraw in CAD a proper...
Those 500w "spindles" are extremely underpowered, terrible runout, bogs down for nothing . Get yourself a proper one: RoutER11 CNC Kit
Refer to the documentation: docs:blackbox-x32:connect-micro-limit [OpenBuilds Documentation] or upgrade to the filtered switches...
Monitor it, see if it made the difference. A floating wire (not connected on both ends) acts effectively like an antenna - catching more EMI...
If you are sure, then you are more than welcome to review the code change that made up v1.0.369, find the bug in the change, and submit a patch:...
Tugging on wiring while moving pulled on loose or broken wiring causing one of the 4 wires to loose solid contact throughout again.
Thats promising at least. Did you load the 1010 profile? The spindle might be heavier than our router11 so might still need to dial in...
Does the motors jog fine? Can they jog at 1000mm/min (Your Homing Seek speed) without stalling? Homing is set to Disabled?
Dust Hose grounded? See docs:blackbox-x32:faq-emi [OpenBuilds Documentation] Usual causes could be - mechanical stall (sounds like you checked...
Awesome!
I am also unable to render your file, so doesn't just look like a PC specific issue. What CAM are you using? Are you using a Grbl/openbuilds Post?
