Separate names with a comma.
Some features disabled for guests. Register Today.
Troubleshooting tab > Application Diagnostics You can perhaps try forcing the GPU using Supported Command Line Switches | Electron (append to the...
Not on BlackBox, that was the old Xpro behaviour. Blackbox shuts drivers down, and stays down with fault indicator lit until power cycled. Great...
CONTROL > Wizards and Tools > Calibration We have a video for that on our YouTube, see the Videos link on menu at top of this page
Please contact the store via Support > New Ticket for assistance, thanks!
Created more as a reminder Ivobe/custom by petervanderwalt · Pull Request #316 · OpenBuilds/OpenBuilds-CONTROL - will go cherry picking
Sincerely meant to point your focus at more likely root cause. And yes, long Vectric jobs are a plenty
Unlikely to be CONTROL / USB related (it works for the other thousands of users)
Also any 3rd party components (eg non OpenBuilds power supply etc?)
Don't forget to select your machine from Grbl Settings > Select machine from the list > save and Reset Deleting all settings is the opposite of...
By deleting the Macro. Right click on the Macro Button on the Macros tab
Some of those are unlikely (current adjusment for instance, if it worked fine and no one changed it...) But yes, eliminating mechanical vs...
Stalling after being fine for a while could be dust build up in leadscrew, could be grubscrews rattling loose on shaft coupler, or wiring damaged...
Development conversations are best handled with issues/pulls on the github repo thanks. Seperate pulls per feature are recommended
Only one of the three possible causes and things we need you to check requires an (optional) multimeter, so you could still tackle those. Either...
That's a symptom not a root cause. Find the source of the EMI and address that, simpler than trying to work around with band-aids on everything.
Don't test by homing. You are going to break something :) Test by hand, using the Troubleshooting tab first. Activating the switch by hand with a...
You can test Interface itself, away from the machine, somewhere in your house. Power it up off USB-C cable and try docs:interface:device-test-mode...
We are waiting on your feedback. Step back a moment, perhaps, as one needs a calm mindset sometimes. When you are ready, see earlier advice:...
Well as it was working, backtrack what you might have changed. And restore your working Grbl Settings backup (always good to take a backup...
Could be EMI (see the FAQ in the Blackbox docs docs:blackbox-x32:faq-emi [OpenBuilds Documentation]) or outdated firmware (Make sure you are on...
