Separate names with a comma.
Some features disabled for guests. Register Today.
X32 should have $5=0 for Normally Open switches (like our Xtension Limits) or $5=7 for NC switches
CONTROL is just a host - Grbl holds the settings: Grbl v1.1 Configuration and Additional or extended settings
Post a Grbl Settings backup, lets just make sure you do have $4=0 and $1=255 (at least) If its 3rd party motors, see...
Did you remember to install a machine profile? (CONTROL > Grbl Settings tab > Select a machine from the list > Save and Reset If not, key values...
M3 and M4. Relay 2 is Direction for the Spindle
Indeed does look suspect. For Carvoco assistance though, you'd have to refer to Support - they would be better able to assist with product...
CAM based estimates are always more accurate. Ultimately both are Estimates, the real runtime will be something different too It is quite a...
Source/Reference? $I = Build Info: See Grbl v1.1 Commands Arc Tolerance is $12=0.002 (DON'T CHANGE THE DEFAULT VALUE!) We don't have a Fork, we...
Correct for BlackBox X32 Work through docs:blackbox-x32:faq-emi [OpenBuilds Documentation] As for directions: Test that machine is setup...
Just means the Operator (you) didnt click Probe Type at the bottom to Tell CONTROL you don't have the XYZ Probe.
Lightburn bugs/issues are best posted on LightBurn Software Forum E-stops are a good idea: Wall socket >...
CONTROL is just a sender. Shows you where your gcode lies relevative to the origin, and allows you to set the machine to the same origin....
Released 1.0.359: OpenBuilds CONTROL Software Thanks to everyone that helped with logs and info and the initial reports!
CONTROL v1.0.359 released: OpenBuilds Software: OpenBuilds CONTROL and OpenBuilds CAM 1) Fixed bug that prevented CONTROL from running on MacOS /...
Great news you all, root cause of the bug has (finally!) been found, and main bug fixed! To accomodate the fix we have to apply and test a couple...
Moves on one command will be synced yes. You may need to do some maths to make sure the Z distance/feedrate does what you need it to do for the...
Standard settings should be fine. 4X and X32 has no difference in Endstop filtering etc. But 2-wire limits are always a little more prone to...
1) Not directly no - you can program a long Z move at a certain feedrate - but its not constant. Would it matter? As long as the gcode runs, you...
Motors and limits both indicate non-standard Grbl settings. 1) make sure you have latest CONTROL from software.openbuilds.com 2) connect and go...
