Separate names with a comma.
Some features disabled for guests. Register Today.
$4=0 is correct $22=1 should be correct for standard Homing (but can be customized: Additional or extended settings) - no need to for standard...
Harder/Faster they go, more they spark (: (when brushes are worn)
CONTROL > Grbl Settings > Scroll down to Hard Limits > Set to Disabled > Save and > Reset when prompted Which router do you have? If its our...
There's always the option of Hard Limits = OFF (use Soft Limits - prevent a runaway BEFORE it happens, rather than a switch that stops it once its...
Oh, and have you checked your router's Brushes recently (wear item, standard maintenance about every 100 run hours, as they wear down the spark...
Post some pictures of your setup, we can help check for possible issues Our standard FAQ docs:blackbox-x32:faq-emi [OpenBuilds Documentation]...
Connect old controller: CONTROL > Grbl Settings > Backup Settings Connect to new Controller > CONTROL > Grbl Settings > Restore Backup In the...
For the BlackBox 4X yes - BUT by now superceeded by the X32. Compare old docs:blackbox-4x:connect-4-wire-laser [OpenBuilds Documentation] versus...
See Getting started with Javascript Macros in CONTROL / Library of Macros created by the community Grbl doesn't support canned cycles natively,...
3D printers uses "slicers" to convert STL to GCODE Well, for CNCs you use a "CAM application" to convert files (DXF, STL, etc) to GCODE:...
Please see section 15 of Terms of Service and Rules | OpenBuilds What controller do you have? Which limit switches?
Good to have it here too, but we did update software.openbuilds.com to show 1.0.348 on the Mac and Linux tabs. Sure we could modify CAM to do the...
See docs.openbuilds.com > BlackBox X32 > Laser wiring pages We don't show you to use Tool Enable, we only show the PWM wiring. Please follow our...
We also have a Menu item right there that uses G53 (Z high). User just has to pick the appropriate one (99% of our userbase does NOT use raised...
Github.com/gnea/grbl/wiki about halfway down. But just use any Grbl compatible CAM/Post. Easier. See docs.openbuilds.com > Software section
CAM can only connect to new versions of CONTROL. Due to an ongoing bug we can't release new versions for Mac and Linux Luckilly super simple...
You can, enter the IP into a Browser (Not CONTROL)
Interface replaces the PC: Watch [MEDIA] For more details and how to use it see docs:interface:usage-instructions [OpenBuilds Documentation]...
OK hold one sec: Interface? Or BlackBox? BlackBox doesn't have a screen - so is this thread about connecting Interface? Interface is not...
That is, make sure you have $70=7 [at the least 1 (Telnet) +2 (Websocket) +4 (http) = 7 - per bitmask Additional or extended settings] And...
