Separate names with a comma.
Some features disabled for guests. Register Today.
Release v1.0.336 ยท OpenBuilds/OpenBuilds-CONTROL
Possible, lets see if support.openbuilds.com > new ticket can help out with that (:
Any relation to the VFD running coinciding with the reboots? (EMI?)
No expected delays - should be out sometime this week right on schedule
usually you'd go for less than 40%...
4.7v is within spec (5v less voltage drop across the reverse blocking diode) We can go down to 4.4v (3.3v rail + 1.1v LDO dropout) Depending on...
Checkout Search Results for Query: AMB 1400 | OpenBuilds
Normal noise on the line. Most people set a minimum of like 7200rpm (for air cooled). It doubles up at protecting your spindle against overheating...
Make sure to set Minimum speed in the VFD parameters (often called Min Freq - see your VFD manual)
I don't know of anyone else trying it. And herein lies the key: Try it! The world needs more trailblazers (:
Correct, bubbled up epoxy shows signs of a serious short /over voltage condition. See the last paragraph of the linked page above
Click on through to the link provided in the error for a comprehensive rundown.
Use docs:interface:upload [OpenBuilds Documentation] You are a little outside the target market with that one - our vision there was "use our...
Checked and it is still working. One thing that might explain your issue: Make sure USB is already plugged in when the Interface boots (or click...
Shouldn't need anything special. If BlackBox and Interface is up and running as far as you can jog the machine from Interface - the bridge code...
Glad you found it (: Grubscrews happens more often than you think (:
Microcontroller unable to parse large gcode file and calculate extents of a job - would take a long time to run through the file line by line to...
Are you sure the grubscrews on the pulley is tight? Perhaps the pulley is spinning, but the motor is locked after all?
Correct. PC > Interface > BlackBox - but again (and for others stumbling on this later) its not MEANT to be used with a PC based host and...
