Separate names with a comma.
Some features disabled for guests. Register Today.
Yes, i quoted that - thus - contact the vendor of that controller, for advice on setting up a VFD. Its in reply to your question: No we don't,...
You'd have to take that up with your Vendor, a lot of the advice above was under the assumption you were a customer running our controllers as you...
Then most likely that Still worth a check - they might have been fine for the old post - do they still make sense for the proper post? VFD...
Are you using our Post? Error 33 means The motion command has an invalid target. G2, G3, and G38.2 generates this error, if the arc is...
There is a team working on it yes
Make sure to use our Vectric Post processor with Vectric to ensure its optimal: docs:software:vectric [OpenBuilds Documentation] If you had that,...
OK, so we've located the bug in Bug: Probe queue stuck · Issue #277 · OpenBuilds/OpenBuilds-CONTROL and have fixed it in a Firmware update: 1)...
1) Tool RPM set correctly in the toolpath? 2) Grbl Settings correct? ($32=0, $30=1000 or max spindle rpm?) 3) Spindle wired correctly and can be...
Is your Interface firmware up to date? V1.57 at the time of this reply. If not, please update. Where is the gcode from though? 100% sure it...
Use the Transform tool, instead of mouse move to move the entity. Toolbar on the left, icon that looks like a ruler. As for the size - possible...
Export as DXF R14, not SVG See Problems with importing DXF into OBcam as a step by step example with QCAD
1) Test the laser manually (Can't confirm how to do that in LightBurn, but in CONTROL that'll be the TOOL ON menu) 2) Make sure Laser Mode is set...
That jump looks like its at the entry point - have you tried a very slow plunge rate as a test? The gcode looks correct, the symptoms still looks...
See our docs page: [ATTACH]
You maybe coincidentally had G28 set higher up than now? G28 is not a fixed position (Like Homing does) - you the operator has to specify where...
As its an Ox, first thing to check is the Grubscrews on all the pulleys - they can go loose over time, pulley slips on shaft, during direction...
Not our post then Make sure to use our Post: docs:software:fusion360 [OpenBuilds Documentation] which uses Homing instead of G28
Possible. Did you install Sketchup so you can open the Sketchup files?
Full CAD model on the Files and Drawings tab of OpenBuilds LEAD CNC Machine 1515 (60" x 60") or also on OpenBuilds LEAD CNC Machine 1515 (60' x...
