Separate names with a comma.
Some features disabled for guests. Register Today.
BlackBox 4X runs Grbl, so see Home · gnea/grbl Wiki BlackBox X32 runs grblHAL, so see Home · grblHAL/core Wiki Yes, if you get a new BlackBox...
@Colin53 Sorry I missed this reply over the weekend: "$16 Spindle Pins Invert" allows you to configure spindle pins on the fly: Try $16=0 and...
Implemented in V1.0.339 or later (not out yet, but part of the work thats going into next release) [ATTACH]
If the wheel does measure undersized they would be the right contact yes. Do the measurements, then let them know
Loosen all eccentrics fully: Loosen the wheel on the fixed side - the holes has a little play in them - press the wheel inwards before tightening...
Only one attachment (: the gcode file. Please add the Screenshot (:
It does. It basically says it shouldn't (: Homing tells the controller "where is the machine" in the real world. 0,0,0 is ALWAYS on the far...
Have a read through Frequently Asked Questions · gnea/grbl Wiki first Soft Limits needs Homing. And Soft Limits works great when Homing is set...
Bug confirmed, see Bug: Probe queue stuck · Issue #277 · OpenBuilds/OpenBuilds-CONTROL for progress updates - should be fixed in next update -...
That should be all it takes. Make sure signal is sufficiently strong, details correct, and check router settings as well (802.11b/g enabled, no...
Good suggestion: enhancement request logged: Feature request: vacuum/coolant option for Surfacing Wizard · Issue #275 · OpenBuilds/OpenBuilds-CONTROL
Best to ask Lightobject's support team directly about the specifics of their controllers Contact Us or the number in the footer of their website.
But why? Not to shoot the BlackBox down - but this is not the right solution for this machine. NEMA 23 Stepper Motor - High Torque Series is our...
The existing NEMA34s, large gearing ratio on the intermediate belt, etc I wouldn't go with a Grbl/Stepper based setup for a machine like this....
Grbl 0.9 introduced the pin change Home · grbl/grbl Wiki - 1.1 should be the same.
Display: Not at this time. You can send any move commands using the Serial Terminal or custom Macros.
Which Post Processor are you using?
See docs:blackbox-x32:currentadjustment [OpenBuilds Documentation] > Fault Indicators in second half of the page. But yes, if multiple...
Was it turned off with moves still in the queue? I see 19 moves in the queue there in the screenshot. Have you tried with a clean start of the...
Thanks, will have to look deeper into it on Monday, will revert back to you Can you please elaborate on this? When does it move Z? When you power...
