Separate names with a comma.
Some features disabled for guests. Register Today.
Screenshot of the log of the attempt that doesnt move please? If you are unsure how to take a screenshot see Open Snipping Tool and take a...
Likely false triggers caused by EMI. Space limit switch wiring away from motor wiring, or upgrade to a proper controller and filtered Limits...
Leadscrews vs Belts (massively better on torque, accuracy, reliability) Much more rigid frame provides the ability to go a lot harder without...
That looks like a backup from Grbl 1.1 (BlackBox 4X) We need the new backup off GrblHAL from the X32 - to check your settings as it pertains to...
That's a good catch then (: its one of those things you'd never think to check until you know about it. Happens to us all! Glad you found it
Definitely on the aggressive side. DOC should be more like half tool diameter (so 1.8") and then lower feedrate as well. Start slower and work up...
Possible, what speeds and depths were you running at? A loose collet nut, or undersized tooling (6mm shaft in 1/4" collet for example) can pull...
Wiring wise should be just about the same, we have a Tool Enable pin now, so shouldn't need to change DIR to be an Enable any more. But if you do...
We'd be able to help if you provide sufficienct details: - Screenshots of any errors - Screenshots of log entries (Serial Tab) - a Grbl Settings...
Please get in touch with the store via Support > New Ticket and they will help you with the issues. Thanks
The dropdown just fills in the form below for you with our machines defaults. With a modified config, its stored on the controller forever, and...
The BlackBox 4X needs a delay (Grbl had no configurable inputs). The BlackBox X32 runs GrblHAL, and it can be compiled with a plasma plugin that...
Make sure $4=0 as per our profiles. In CONTROL > Grbl Settings > Select Custom to have our base defaults correct, then enter the relevant settings...
The sheer amount of Vectric Tutorials on YouTube should be a convincing factor too. It really is worth it.
Error 31 means the OS shut down the port. Either USB Selective Suspend, or EMI. Try different ports on the PC too (proper USB2 on motherboard...
Screenshots of error logs helps a lot. Port issues are usually driver/Os related. Win11 works fine, but check that you have FTDI drivers (not...
Grbl 1.1g but over an IP? Green line of the log screenshot. Doesn't look like standard set up? Attempt at a diy wifi bridge? Queue is confused too...
For future advice, those little $9 "USBTinyISP" programmers on amazon can be found in just about every drawer in my lab (: they work great!...
Yes, should still apply, as the X32 runs GrblHAL which is Grbl compatible.
Polyline conversion is done in the CAD workspace inside QCAD: Search Results for Query: Qcad polyline from selection | OpenBuilds Then save as R14 DXF
