Separate names with a comma.
Some features disabled for guests. Register Today.
Double check - just in case it changed Does the ToolOn/ToolOff buttons in CONTROL work? (To rule out GCODE being wrong) If also not, I'd refer...
Are you sure you enabled Laser Mode in Grbl Settings? See Grbl v1.1 Laser Mode · gnea/grbl Wiki
GrblHAL has some upgraded toolchange support: See Manual, semi automatic and automatic tool change · grblHAL/core Wiki Which we intend...
1) did you remember to disable USB Selective Suspend? docs:blackbox-4x:install-windows-selective-suspend [OpenBuilds Documentation] 2) Could also...
(: We do have one! See Post #22 in OpenBuilds LEAD CNC Machine 1515 (60" x 60") - demand's too low for a "kit" but the full details are available...
Thanks, but if you have issues, continue with the existing support ticket that's already there (:
Refer the reply to your existing support ticket on support.openbuilds.com, thanks!
Perfect, as designed. Its purposely undersized for many reasons, ease of assembly primarily. Its NOT an issue, the leadscrews are constrained...
Ahhh sorry! My bad
Also, if you don't have a Z axis, you must first recompile Grbl to disable the Z axis Homing (which happens first) - i only see two switches. This...
Seconding. Leadscrews are purposely undersized and you should use it "as designed"
Leadscrews for the win (:
4.2amp peak motors, but at what voltage. Gonna use our motors for the math because I know the specs by heart but the concept should translate:...
Custom firmware can still be made to respond to gcodes GitHub - tgolla/GCodeParser: The GCode parser is designed to parse GCode in order that it...
Wouldn't it be better to run native Arduino code so you have full control over all this? AccelStepper: AccelStepper library for Arduino
Correct, that was an intended config - pass through NO on relay 1 to COM on relay2
Just an example. Not saying it is that - but EMI/Grounding is less science and more intuition. Radiated interference, can induce voltages in...
Sometimes too much grounding can create Ground loops too - not sure how different your machine is from our stock setups, but our standard kits...
No need to move anything, can just plug in the USB cable and go :) Looks a bit overpriced compared to...
Suitably sized it should be fine. Endmills and holddowns surely weighs less than some of those old laptops people prefer for the shops :) Can...
