Separate names with a comma.
Some features disabled for guests. Register Today.
Grbl does not support toolchanges, making it quite difficult to implement.
Hard to tell from far away, but that resonance sound before the stall sounds like something is a little tight still. A partial teardown so you...
Attach the actual GCODE file, we want to look through and see if any moves are high Next up, did you check your machine is setup correctly (Jogs...
Post your GCODE file please
Don't use the Goto Zero button if you have fixtures in the way. Interface moves down to Z+5 first (rather, usually bit is down lower and it...
Whatever is contained in your GCODE file > get sent line by line when you Run job Your JOB FILE contains the commands - that menu isn't accesible...
One could get around that by using a more repeatable pen mount method. Remember Servo positions are Absolute and comes from your GCODE. Pen...
1) Make sure your machine JOGS correctly (Thats what $3 sets) X+ should move the X carriage to the right Y+ should move the gantry backwards z+...
1) make the machine Jog correctly first ($3) 2) $23 tells Grbl "where is the switch" (default is Axis Maxima. If any of your switches are on the...
1) Try a different access point if that's not an option 2) Do not setup Wifi until you can try a different AP. Also check your AP logs for...
This one is also a popular choice...
Not easily no. Its ultimately not the right type of machine. Cut50Ls are quite cheap. [MEDIA]
Still looks like serial corruption caused by EMi Running a plasma? Replace the HF start inverter with a CNC LF/Blowback inverter.
That is dangerous (not just a Probing issue) so best to find that short and resolve it yes! Process of elimination can be tedious, good luck!
Not at this time, no, but thanks for the suggestion.
For now, we had a couple users complain about the removal of the Move tool (because it works great with their files). I am putting it back, and...
Which CAM are you using?
That does confirm that DC GND is present on the spindle body. Multimeter in continuity > One probe on the collet, the other on DC GND. You...
Use your to machine replacement plates for itself?
CONTROL is metric under the hood ($13=0) and does conversions for you
