Separate names with a comma.
Some features disabled for guests. Register Today.
Try updating CONTROL to v1.0.331 https://github.com/OpenBuilds/OpenBuilds-CONTROL/releases/download/v1.0.331/OpenBuildsCONTROL-Setup-1.0.331.exe...
Checkout Grbl v1.1 Laser Mode · gnea/grbl Wiki - the Grbl Wiki is a must-read to understand the firmware Please enable Laser Mode when using the...
No, that's for the Interface (Reading the wrong instructions) Your BlackBox is the one that needs to know its running a 2-axes machine. Plug it...
Correct! The C-Beam machine uses leadscrews Click the Builds tab above > OpenBuilds Machines > find the C-Beam Machine build Under the Build you...
Refer to the Changelog: OpenBuilds-CONTROL/CHANGELOG.txt at master · OpenBuilds/OpenBuilds-CONTROL - always good to know what changed in an...
More likely Wiring docs:blackbox:faq-identify-motor-coils [OpenBuilds Documentation] or Mechanical binding. The voltage out of a stepper driver...
Make sure to flash the 2-axes firmware from Wizards and Tools > Firmware flashing tool As is, its waiting for a non existant Z to home first
Checkout the BlackBox - plug and play: https://docs.openbuilds.com/blackbox with full support. Unfortunately we can't provide code-level...
Standard grbl spits out a string on reset/ctrl+x: "Grbl 1.1g ['$' for help]" which we parse for the word "Grbl" at the start of the string, and...
Any controllers running Home · gnea/grbl Wiki Grbl-mega is not the same as Grbl
Sending it takes very little resources (sends 64 chars at a time) - play around in the simulator etc. If it feels sluggish it would feel so right...
No limitations, if your PC specs are a little slow, you can disable (for example) the 3D viewer etc if you need to. Would recommend something...
See docs:software:overview [OpenBuilds Documentation] OpenBuildsCAM and SketchUcam are about as free as it gets. Depends what you mainly intend...
Or just get the Switches and install it. Couple bucks, 10 mins of your time for a lifetime of repeatable and predictable offsets, proper Machine...
As per above: ensure you are using the correct Post Processor
Make sure you use the correct Post: docs:software:vectric [OpenBuilds Documentation] Also make sure your Interface Firmware is up to date (v1.52)...
Rightly so. You cannot have 0 stepover. 0=infinitely looping in the same spot. Enter a larger number, default is 40%
If the bit digs in deeper on one side or the other - its not perfectly square to the machines XY motion plane
