Separate names with a comma.
Some features disabled for guests. Register Today.
With a custom machine, you have to think about where to compromise, where to make changes, where to follow the examples of the parent its based...
See How to calculate V-Slot® deflection So yes, for a very long custom machine, you may want to design in additional supports. You could have a...
Fine on 24v - also works for the folks with 48v :) Ultimately, the stepper driver is delivering a Constant Current (chopping voltage to keep ohms...
Use ours - we've spent ages matching the specs so it perfectly suits BlackBox and the rest of our ecosystem for you NEMA 23 Stepper Motor - High...
If it was working before, and jogging the right directions, it was in order? There are 4 valid combinations that allow connection two coils to 4...
If its our motors, yes. If is not, see docs:blackbox:faq-identify-motor-coils [OpenBuilds Documentation]
Where do you have the current set to at the moment? This is mentioned in the section 2.2.1 documentation as well.
See https://docs.openbuilds.com/blackbox/ > Section 2.2.1 deals with current adjustment, section 2.2.2 with microstepping (We don't recommend...
We have that under the RESOURCES section (: - thanks for the reminder Jim! Redouane checkout How to calculate V-Slot® deflection and also Excel...
Thanks for the suggestion!
Correct. Molex SL, and Dupont.
Are you sure your version of CONTROL is up to date? V1.0.331
Contact the store via https://support openbuilds.com > New Ticket and they will help you check what the issue may be, likely a wiring short...
Good catch! Yes that is scary! Please let the company know we do not approve, you can include a link to this thread or ask them to contact us via...
We would not recommend using it for Mains AC sorry (as the rest of the board carries low voltage DC, and we did not intend for it to handle AC, no...
Some of @sharmstr 's awesome Macros: Expand USB Port Selector in OpenBuilds Control [IMG]...
Normally, and most basic way: Click the button on the Macros tab, or assign a Keyboard shortcut to it. If its grayed out, you need to be connected...
Yes you can. Max Travel is the only change needed
Yes, the cone follows the DRO positions. You can abuse the macros to their full extent. Inject side/top/bottom/front/back buttons over the 3D...
Try a G4 Pxxx where xxx = enough seconds for the machine to come to a rest / sync the buffer before the $H You send some commands, they go into...
