Separate names with a comma.
Some features disabled for guests. Register Today.
Labor day long weekend, so more likely Tuesday :) That said, returns for driver issues are very rare. More likely wiring on my bets, secondly...
Yes should be fine.
Correct.
See How to calculate V-Slot® deflection to learn about the rigidity of each profile.
CONTROL only supports Grbl 1.1 based controllers You can use your existing electronics if you wish, refer to your other thread where I mentioned...
See Belt vs ACME vs ball screw - Dust, Damage Control, backlash?
Possibly, make sure you have $13 (report inches) set to 0/disabled CONTROL is all millimeters internally and does the display conversions for you
The GrabCAD repo is more up to date: OpenBuilds® | GrabCAD
That computer's WebGL specs might be too low. Nothing much you can do, except ensuring its got a decent GPU, and that all the computer's drivers...
Also bring in the tensioned leadscrew design from the LEAD1515 (going over 1000mm needs the tensioned setup) Pull up Sketchup Make Index of...
Is it our motors? Or 3rd party?
1) check grub screws on shaft couplers (could be slipping on the motor or leadscrew side) 2) check current adjustment on motors 3) check...
You can re-use some of your components yes. The kits has motors, electronics, etc as optional extras during checkout - just leave it unticked. A...
1) Dust: No real impact. The leadnuts prevent the dust from entering. Occational cleaning will be in order. We also have a really great dust...
Good solution! Thanks for sharing!
Thanks for tagging in Jason - and if i re-read your Build, you aren't using the input as DOOR at all, you were redefined the pinmap grbl/cpu_map.h...
Refer to the comments in Grbl's config.h to learn more: grbl/config.h at bfb67f0c7963fe3ce4aaf8a97f9009ea5a8db36e · gnea/grbl and grbl/config.h...
Homing sets Machine Coordinates SetZero sets the Work Coordinates Work Coordinates are what aligns the GCODE to the Stock - so you'd set it to...
Thanks for the suggestion
No there is not. You can write down the parameters as a makeshift backup in case you do overwrite them at some point with incorrect values
