Separate names with a comma.
Some features disabled for guests. Register Today.
Its saved automatically, and that gets saved to the EEPROM on the BlackBox's microcontroller (Grbl does that - learn more here Home · gnea/grbl...
Opposite. With $5=0 (Default) we expect NO switches When they Close (triggered) they connect GND to SIG (logic low) $5=1 with NC switches are...
CONTROL only supports the official Grbl firmware from GitHub - gnea/grbl: An open source, embedded, high performance g-code-parser and CNC milling...
Note that CONTROL only supports standard Grbl Home · gnea/grbl Wiki
1) Make sure you are using a proper Grbl compatible Post Processor 2) Could also be EMI: See docs:blackbox:faq-emi [OpenBuilds Documentation]...
Connectors are included with the BlackBox Wiring: If your spindle controller only needs a GND+PWM you can use the 2-conductor: Xtension Wire By...
Fan is preinstalled, as are the connectors for connecting to the BlackBox (you can order extras if you want to make up easily pluggable extension...
For v-bits you'd use a process called V-Carving, typically the easiest way to use that would be Vectric Products - OpenBuilds Part Store
Note that the current rating is a "max" Just like your car engine has a max rev limit of 7000rpm, but you cruise along at 2-3000rpm most of the...
[ATTACH] You changed the Default value from Capital "S" to a lowercase "p" Grbl uses the S-Word. Change that back to "S" please
Post a screenshot of CAM > Settings tab > Settings button > screenshot the settings window including scrolling if it doesn't fit on one screenshot
Save them as Gcode files on the USB, and run them as you would a job. For ease of finding them, make a folder for them
Not that I can see, not aware of any backend changes. Will check in with the other teams for you
Interface can be used with other controllers, IF they run Grbl, and have accesible UART pins to wire to: See docs:interface:connect-generic...
Normally no, both are just Grbl hosts at that point. All Grbl configs are stored in the EEPROM on-chip inside the controller.
If you prefer not to help hold the probe in place you can replace the wiring with something longer / more flexible.
Did you try clearing LocalStorage as advised?
Not related to your other issues - just means CONTROL is not running or out of date
Checkout docs.openbuilds.com - we have our Lightburn setup instructions there I'd use CONTROL to set things up first. Random direction changes...
These type of dispensers comes with a foot switch. [IMG] You can replace the footswitch with the BlackBox's Relay: docs:blackbox:jumper-relay...
