Separate names with a comma.
Some features disabled for guests. Register Today.
Use the Keyboard shortcuts (view or customize from Wizards and Tools > Customize Keyboard Shortcuts)
Checkout docs.openbuilds.com/blackbox to learn everything about wiring up a BlackBox
Hit ESC on keyboard or hit Abort button in software. No need to unplug USB cable
1) is the Fault LED on the front lit for that axis? If so see docs.openbuilds.com > BlackBox > Current adjustment 2) otherwise, most likely...
Try to keep it under about 400mA if possible With an Interface connected as well, probably safer around 250mA. If in doubt measure the 5V rail, if...
No, door is not a Limit switch input and just has a 5v pull up
It is supposed to be 5v. Do check your wiring
Your GCODE likely telling it to do that. Post your GCODE file
Well the WorkBee 1010 was leadscrew driven So you can follow along with the 1010 build, then just add the Tensioning kit to keep the longer 1540mm...
Try the Dragknife option in cam.openbuilds.com - it adds the correct corner swivel moves
You mean to reverse direction of one motor? That is addressed in the motor wiring. See section 3.2.3 of docs:blackbox:start [OpenBuilds...
Off the shelf Kit no. Modular parts catalog from which you can "lego" together your own solution absolutely yes What machine did you have?
Not at this time no - it runs at a max feedrate of 5000mm/min (or lower if your Grbl Max Rate settings limits speeds to <5000mm/min)
Please contact the store you purchased the BlackBox from for further assistance, or contact support.openbuilds.com > New Ticket Thanks
If it goes down to close to the edge of the hole, it indicates your machine is not calibrated correctly (moving distance shorter than commanded)...
Convert Circles to Polylines using your CAD See docs:software:file-errors [OpenBuilds Documentation]
Its important to test using the Troubleshooting tab (no use trying to probe if it doesn't reflect the status, it will just crash) If the LEDs...
1) try a different PC 2) check what changed on your current PC (installed anything else? Windows update? Graphics card update?)
