Separate names with a comma.
Some features disabled for guests. Register Today.
If you can't get the stock electronics to work, consider upgrading to a BlackBox (: see https://docs.openbuilds.com/blackbox to learn more about it
Xpro uses at328pb chip, BlackBox 4X uses at328p. Not the same. Keep Grbl else you are locked in to EstlCAM
There are probably about 20 unique ways to get GCODE out of Inkscape. Various plugins inside Inkscape (some included and tonnes of 3rd party,...
See docs.openbuilds.com to learn everything you need to know You can use a computer running CONTROL (see docs:software:openbuilds-control...
See docs:software:overview [OpenBuilds Documentation] Ie your Hardware, Controller and Host (: but no mention of your CAM
Yes, Fully Loaded is the machine and all the accessories. The store page has a comprehensive listing. See LEAD CNC Machine 1515 FULLY LOADED!...
Which CAM are you using?
As the laser is PWM, spindle is 0-10v its already seperate interfaces. No need to Control the signals. Only power on the relevant device. Vfd off,...
Make sure to install the included rubber spacer :) Also, although in some videos it shows switches installed "upside down" refrain from doing that...
Some vendors recompiles Grbl with FORCE ORIGIN on which messes with how soft limits with continuous is supposed to work. This vendor is one of...
Set $20=0 and Save. You can revisit soft limits later when you learn about Machine Coordinates CONTROL is for use with Stock standard Grbl -...
Are you on version 1.0.330? There was a bug in 1.0.329
[ATTACH] Also checkout the DOCUMENTATION link in the same menu Which has subsections like docs:software:overview [OpenBuilds Documentation]...
Either a PC running CONTROL, or an Interface yes.
The documentation you refer to is for Interface (a hardware product) [ATTACH] See INTERFACE CNC Touch _______________________________________...
Thank you! Added both your writeups (: [ATTACH]
Thank you for sharing these! Would you mind if we link to it from the VFD documentation pages docs:blackbox:connect-vfd [OpenBuilds Documentation] ?
Checkout the following videos (BlackBox powered plasmas) [MEDIA] [MEDIA] [MEDIA] Also see Openbuilds CAM: Initial Height Sensing setup help...
Grbl settings is not stored in the software - it's stored onboard in your controller's EEPROM Use the Grbl Settings tab to restore your last Grbl...
Export to DXF > Convert all splines/arcs/etc to PolyLines > Use a Grbl compatible CAM: See docs:software:overview [OpenBuilds Documentation]...
